Publisher: API Publish Date: 2014 Pages: 386 Language: English Format: PDF PRODUCT NO. C61708 Scope Covers the minimum requirements for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for use in the petroleum, chemical, and gas industries services that handle air or gas. Part 1— General Requirements, contains...
Publisher: NACE International Publish Date: 2015 Pages: 164 Language: English Format: PDF Document Scope This part of ANSI/NACE MR0175/ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in...
Publisher: ASME Publish Date: 2016 Pages: 138 Language: English Format: PDF Document Scope This pipeline transportation systems Code is one of several sections of The American Society of Mechanical Engineers Code for Pressure Piping, ASME B31, and it is the responsibility of the user of this Code to select the applicable Section. This Section is published as a separate document...
Publisher: API Publish Date: 2016 Pages: 340 Language: English Format: PDF Document Scope This standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters (APHs), fans, and burners for general refinery service. This standard does not apply to the...
Publisher: BSI Standards Publication Publish Date: 2013 (Ammendment 2015) Pages: 492 Language: English Format: PDF ICS 25.160.40 ISBN: 978-0-580-91721-9 Size: 13 397 kB Scope The scope of the BS 7910 procedure is to guide the user in assessing the acceptability of flaws in metallic structures. The procedure can be used in two ways: - to perform an assessment of an existing flaw...
Publisher: API Publish Date: 2015 Pages: 280 Language: English PRODUCT NO. C53007 Format: PDF Document Scope This standard specifies the requirements and gives recommendations for the procedures and design criteria used for calculating the required wall thickness of new tubes and associated component fittings for fired heaters for the petroleum, petrochemical, and natural gas...
API, 2015. — 66 p. Product Number: C60209 This international standard specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gas industry applications.It is applicable to valves of: nominal pipe sizes NPS 1/4, NPS 3/8, NPS 1/2, NPS 3/4, NPS 1, NPS 1 1/4, NPS 1 1/2, NPS 2, NPS 2 1/2, NPS 3, and NPS 4; corresponding to...
Publisher: AWS Publish Date: 2015 Pages: 63 Language: English Format: PDF Document Scope This guide essentially provides an introduction to visual examination of welding. These examinations fall into three categories based on the time they are performed, as follows: (1) prior to welding, (2) during welding, and (3) after welding. An extensive treatment is provided on weld...
Publisher: ISO
Publish Date: 2015
Pages: 40
Language: English
Reference Number: ISO 9001:2015(E)
ICS: 03.120.10
TC/SC: ISO/TC 176/SC 2
Stage: 60.60 (2015-09-22)
Abstract
ISO 9001:2015 specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and...
Publisher: ASME
Publish Date: 2015
Pages: 30
Language: English
Format: PDF
Document Scope
This Standard covers the standardization of dimensions
of welded and seamless wrought steel pipe for
high or low temperatures and pressures.
The word pipe is used, as distinguished from tube, to
apply to tubular products of dimensions commonly used
for pipeline and piping...
Publisher: ASME.
Publish Date: 2015 .
Pages: 244.
Language: English.
Format: PDF.
Document Scope .
This Standard provides methods for repair of equipment.
and piping within the scope of ASME Pressure.
Technology Codes and Standards1 after they have been.
placed in service. These repair methods include relevant.
design, fabrication, examination, and testing practices....
Publisher: API Publish Date: 2011 Pages: 274 Language: English Format: PDF Size: 2 291 Kb Document Scope ( API Spec 17D is identical to ISO 13628 Part.4 ) This part of ISO 13628 provides specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees. It specifies the associated tooling necessary to handle,...
Publisher: NFPA Publish Date: 2015 Pages: 88 Language: English Format: PDF Document Scope Scope. This standard shall apply to the design, installation, acceptance testing, operation, and ongoing periodic testing of smoke control systems. A.1.1 This standard incorporates methods for applying engineering calculations and reference models to provide a designer with the tools to...
ASTM A 370-15 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Publisher: ASTM
Publish Date: 2015
Pages: 50
Language: English
Format: PDF
Document Scope
These test methods cover procedures and definitions
for the mechanical testing of steels, stainless steels, and related
alloys. The various mechanical tests herein described are used...
Publisher: API Publish Date: 2016 Pages: 302 Language: English Format: PDF Document Scope This standard establishes minimum requirements for material, design, fabrication, erection, and inspection for vertical, cylindrical, aboveground, closed- and open-top, welded storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal...
Publisher: API Publish Date: 2016 Pages: 36 Language: English Format: PDF Document Scope Scope. This standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection and test requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves.
Publisher: API
Publish Date: 2015
Pages: 74
Language: English
Format: PDF
Size: 932 kB
Scope
This recommended practice (RP) presents recommendations for designing, installing, and testing a process safety
system for subsea applications. The basic concepts of subsea safety systems are discussed and protection methods
and requirements of the system are outlined.
For...
Publisher: ASTM
Publish Date: 2015
Pages: 14
Language: English
ISBN: N/A
Abstract
This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. The steel shall conform to the requirements as to chemical composition specified. The material shall conform to the...
Publisher: API Publish Date: 2013 Pages: 34 Language: English Format: PDF Size: 497 Kb Document Scope This RP applies to all parts of a pipeline or pipeline facility including line pipe, pump station piping, terminal piping, compressor station piping, metering station piping, delivery station piping, regulator station piping, appurtenances connected to line pipe, appurtenances...
Publisher: ASTM Publish Date: 2015 Pages: 13 Language: English Format: PDF Document Scope 1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. NOTE 1 —When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy...
The rules of this Division constitute requirements for the design, construction, inspection, and overpressure protection of metallic pressure vessels with design pressures generally above 10 ksi (70 MPa). However, it is not the intent of this Division to establish maximum pressure limits for either Section VIII, Division 1 or 2, nor minimum pressure limits for this Division....
Publisher: API Publish Date: 2016 Pages: 144 Language: English Format: PDF Document Scope This recommended practice (RP) is applicable to any pipeline system used to transport hazardous liquid or natural gas, including those defined in U.S. Title 49 Code of Federal Regulations (CFR) Parts 195 and 192. This RP is specifically designed to provide the operator with a description...
Publisher: API Publish Date: 2015 Pages: 124 Language: English Format: PDF PRODUCT NO. G16C02 Size: 2030 kB Scope This specification establishes the minimum requirements for the design and manufacture of the following types of new equipment: a) articulated choke and kill lines; b) choke and kill manifold buffer chamber; c) choke and kill manifold assembly; d) drilling choke...
Publisher: ASME. Publish Date: 2015. Pages: 16. Language: English. Format: PDF. APPLICATION Of this supplement . (This is a special Supplement to the ASME pcc-2–2015 Standard.). The ASME pcc standards Committee opened a technical revision in 2010 to address repair. welding considerations for pressure vessels made from Cr–Mo steels in refinery, petrochemical, power generation,...
Publisher: API Publish Date: 2015 Pages: 78 Language: English Format: PDF Document Scope This recommended practice (RP) sets criteria for the design, construction, testing, operation, and maintenance of offshore steel pipelines utilized in the production, production support, or transportation of hydrocarbons; that is, the movement by pipeline of hydrocarbon liquids, gases, and...
Publisher: API Publish Date: 2002 Pages: 36 Language: English Format: PDF Size: 320 Kb Document Scope This recommended practice provides guidelines for safely conducting welding, cutting or other hot work activities in refineries, gas plants, petrochemical plants and other facilities in the petroleum and petrochemical industries. It includes specific guidance to evaluate...
Publisher: ASTM
Publish Date: 2011
Pages: 43
Language: English
Format: PDF
Size: 740 kB
Scope
1.1 This test method covers determination of the Knoop and
Vickers hardness of materials, the verification of Knoop and
Vickers hardness testing machines, and the calibration of
standardized Knoop and Vickers test blocks.
1.2 This test method covers Knoop and Vickers...
Publisher: BSI Publish Date: 2009 Pages: 154 Language: English Format: PDF Document Scope This standard provides terms, symbols and definitions for welding, brazing and thermal cutting of metals. Some definitions might also apply to non-metals. It does not cover mechanically fastened or adhesive bonded joints. This standard is intended for designers, those drafting welding...
Publisher: API Publish Date: 2015 PRODUCT NO. C938C03 Pages: 70 Language: English Format: PDF Size: 1363 kB Scope This report covers many of the lean, standard, super, and hyper grades of duplex stainless steels (DSSs) most commonly used within refineries. The definitions of these terms have not been firmly established by the industry, and vary between literature references and...
This Code covers rules for construction of power boilers, electric boilers, miniature boilers, high-temperature water boilers, heat recovery steam generators, solar receiver steam generators, certain fired pressure vessels, and liquid phase thermal fluid heaters8 to be used in stationary service and includes those power boilers used in locomotive, portable, and traction service....
Publisher: ASTM Publish Date: 2012 Pages: 25 Language: English Format: PDF Size: 229 kB Scope 1.1 Conversion Table 1 presents data in the Rockwell C hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of nonaustenitic steels including carbon, alloy, and tool...
Publisher: ASTM Publish Date: 2015 Pages: 38 Language: English Format: PDF Size: 591 kB Scope 1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing...
Publisher: ASTM Publish Date: 2015 Pages: 11 Language: English Format: PDF Size: 118 kB Scope 1.1 These procedures describe the methods of macroetching metals and alloys to reveal their macrostructure. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for...
Publisher: AWS Publish Date: 2004 Pages: 55 Language: English Format: PDF Size: 455 kB Scope 1.1 This specification prescribes requirements for the classification of carbon steel electrodes for shielded metal arc welding. 1.2 Safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. Some safety and health...
Publisher: NFPA
Publish Date: 2015
Pages: 62
Language: English
Format: PDF
Size: 2 151 Kb
Document Scope
This recommended practice provides the recommended procedures, methods, and documentation for commissioning and integrated testing of active and passive fire protection and life safety systems and their interconnections with other building systems.
Publisher: API Publish Date: 2009 Pages: 124 Language: English Format: PDF Size: 2 218 Kb Document Scope This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up...
This standard identifies various information necessary for communication between a purchaser and a supplier of welding consumables. This standard, together with an AWS, ISO, or other recognized welding consumable standard, provides a method for preparing those specific details needed for welding consumable procurement which consist of the following: a) the welding consumable...
Publisher: ASTM Publish Date: 2012 Pages: 25 Language: English Format: PDF Size: 722 kB Scope 1.1 These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines (see Annex A1) verifying Charpy impact...
Publisher: NFPA Publish Date: 2014 Pages: 143 Language: English Format: PDF Document Scope This code applies to the storage, handling, transportation, and use of LP-Gas. A.1.1 General Properties of LP-Gas. Liquefied petroleum gases (LP-Gases), as defined in this code (see 3.3.36), are gases at normal room temperature and atmospheric pressure. They liquefy under moderate...
Publisher: API Publish Date: 2009 (Errata 2011) Pages: 78 Language: English Format: PDF Size: 858 Kb Document Scope 1.1 This recommended practice (RP) sets criteria for the design, construction, testing, operation, and maintenance of offshore steel pipelines utilized in the production, production support, or transportation of hydrocarbons; that is, the movement by pipeline of...
Publisher: API Publish Date: 2014 Pages: 162 Language: English Format: PDF Document Scope The purpose of this recommended practice is to provide guidelines for classifying locations Class I, Division 1 and Class I, Division 2 at petroleum facilities for the selection and installation of electrical equipment. Basic definitions given in the 2011 Edition of NFPA 70, National...
Publisher: API
Publish Date: 2014
Pages: 60
Language: English
Format: PDF
Size: 623 kB
Scope
This standard provides installation quality control procedures for monolithic refractory linings and may be used to supplement owner specifications. Materials, equipment, and personnel are qualified by the methods described, and applied refractory quality is closely monitored,...
This Section is a “Service Section” to the other BPVC Sections, providing material specifications for ferrous materials adequate for safety in the field of pressure equipment. These specifications contain requirements for chemical and mechanical properties, heat treatment, manufacture, heat and product analyses, and methods of testing. They are designated by SA numbers and are...
The purpose of these recommended guidelines is to promote safety in the use of steam heating, hot water heating, and hot water supply boilers that are directly fired with oil, gas, electricity, coal, or other solid and liquid fuels. These guidelines are intended for use by those directly responsible for operating and maintaining heating and hot water supply boilers. These...
Publisher: ASTM Publish Date: 2013 Pages: 25 Language: English Format: PDF Size: 716 kB Scope 1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used....
[/URL][/img]
Publisher: ASTM
Publish Date: 2015
Pages: 29
Language: English
ISBN: N/A
These test methods cover the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area.
Publisher: BSI Standards Publication Publish Date: 2004 ICS 25.160.10 ISBN: 0-580-44628-X Pages: 14 Language: English Format: PDF Size: 276 kB Scope This standard specifies requirements for the content of welding procedure specifications for arc welding processes. This standard is part of a series of standards, details of this series are given in EN ISO 15607:2003, Annex A. The...
Publisher: API
Publish Date: 2015
Pages: 120
Language: English
Format: PDF
Size: 3042 kB
Scope
This specification covers seamless, centrifugal cast, and welded alloy line pipe with improved corrosion resistant properties. The purpose of this specification is to provide standards for pipe with improved corrosion resistance suitable for use in conveying gas, water, and...
This specification identifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, and purchasing of wellhead and tree equipment for use in the petroleum and natural gas industries. This specification does not apply to field use or field...
Publisher: API Publish Date: 2015 Pages: 84 Language: English Format: PDF Document Scope The scope of this technical report is to provide design guidelines for oil and gas subsea equipment utilized in highpressure high-temperature (HPHT) environments (refer to 3.1.16). For the purpose of the technical report, HPHT environments are intended to be one or a combination of the...