СПб.: Издательство Политехнического университета, 2015. — 248 с. Представлены сведения о проектировании, изготовлении и установке погружных платформ на северо-восточном шельфе о. Сахалин по проектам "Сахалин-1" и "Сахалин-2". Приведены данные о наиболее важных аспектах процесса создания морской нефтегазодобывающей платформы "Беркут" с подробным изложением сведений об основании...
Lunar and Planetary Institute, 1998. — 130 p.
Meteorite impacts are getting plenty of respect these days. The public regards them as
the established destroyer of dinosaurs and as the possible destroyer of civilization. The large
planetary science community sees impacts as the process that helped form the solar system
and is still modifying planets more than 4 b.y. later....
The University of Arizona Press, 1993. — 527 p.
The Moon, which has always ruled Earth's nights, was first viewed by telescope
in 16°9, first touched by machines in 1959, and first visited by human beings in
July 1969. It was the object of intense scrutiny for the quarter of a century
centered on that incredible visit and its five successors. It may become so again.
In the...
Lunar and Planetary Institute, 1982, 508 pages.
The technical triumph of manned landings on the Moon and the return of samples from the lunar surface has provided scientists with a unique opportunity to advance our understanding of the nature, evolution and origin of the solar system. The nine suites of samples recovered by the Apollo and Luna missions have provided so many...
Cambridge University Press, 1991, 778 pages.
Digital version of the classic 1991 publication, a one-volume reference encyclopedia of scientific and technical information about the Moon.
Elsevier, 1976, 311 pages. This book about lunar stratigraphy begins with a brief view of the Moon as a planetary body. Subsequent chapters evaluate the energy sources available in the lunar sedimentary environment, present information on the general geology of the lunar crust, and offer detailed information from some sedimentary units sampled during the Apollo missions.
Lunar and Planetary Institute, 1986, 833 pages.
A collection of papers from a symposium held in 1984, the articles contained in this book provide information about lunar geology, lunar science, construction techniques, transportation issues, base design, and subsystem designs (e.g., power generation, thermal control, and life support), as well as many other topics.
Second Edition. — Cosmos Books, 1995. — 56 p.; ill. — ISBN: 1-885609-03-5. Even before the launch of the first artificial Earth satellite by the Soviet Union shocked the world, the fundamental foundation for manned space flight, with its ultimate objective of leaving the confines of the Earth for the Moon and more distant celestial bodies, had been laid. In 1903 Konstantin E....
Lunar and Planetary Institute, 1986, 800 pages.
When the decision was made to explore the Moon and bring back lunar r r samples, scientists hoped that the resulting information would clarify the origin of the body that poets and lovers have pondered for 10,000 years. Indeed, solving the mystery of the Moon's origin was billed as a major goal of lunar exploration. As it turned...
Meteoritical Society, 2007. — 154 p. The geological guidebook that follows has been prepared for the occasion of the 70th Annual Meeting of The Meteoritical Society in Tucson, Arizona, and a society field trip to the crater. The society last visited the crater in 1974 on a trip led by the late Eugene M. Shoemaker and one of his former students, Susan W. Kieffer, who is now the...
Владивосток: Изд-во Дальневосточного университета, 2015. — 90 с.
Справочник содержит краткий исторический экскурс в формирование русской диаспоры на Тихоокеанском побережье Америки, а также биографические сведения о русских американцах, расположенные в алфавитном порядке. В справках-персоналиях указаны следующие данные: фамилия, с вариантами разночтения, имя и отчество. Для...
Владивосток: Изд-во Дальневост. ун-та, 2015. — 55 c.
Книга посвящена русскому православию на Аляске. Зародившись во времена Российско-Американской компании, она продолжила свою деятельность и после продажи Аляски. Если на первом этапе на ней лежали в основном миссионерские функции, то в конце XIX и первой половине XX века русское православие стало центром религиозной и...
Владивосток : Изд-во Дальневост. ун-та, 2015. — 39 с.
В книге впервые дается краткий обзор деятельности русских фотографов в Китае. Хотя общепризнанными центрами русской фотографии являлись Харбин и Шанхай, большое число русских фотографов успешно работали и в других городах Китая. Издание
иллюстрировано работами русских мастеров фотографии, даны их биографии.
Владивосток : Изд-во Дальневост. ун-та, 2015. — 35 с.
Книга описывает музыкальную жизнь в русском Китае, которая была довольно богатой благодаря присутствию в эмигрантской среде большого числа талантливых людей. Очагами культуры являлись Харбин, Шанхай и Тяньцзинь, где музыканты из России смогли открыть музыкальные учебные заведения, собрать оркестровые коллективы, выступать с...
Лабораторный практикум для студентов всех специальностей. Минск : БГТУ, 2015. – 159 с. Лабораторный практикум разработан в соответствии с программой дисциплины «Защита населения и объектов от чрезвычайных ситуаций. Радиационная безопасность». В практикуме рассмотрены основные теоретические положения радиационной безопасности, приведены описания приборов и экспериментальных...
Учебно-методическое пособие для студентов инженерно-технических и химико-технологических специальностей. — Минск: БГТУ, 2009. – 104 с. Даны общие сведения о назначении, структуре и устройстве механических приводов, показано устройство и конструктивные особенности отдельных механизмов, передач и их деталей как составных элементов привода. Приведены примеры оформления рабочих...
БГТУ, 2012. — 3 с.
Исследована проблема формирования системы лесного менеджмента в Беларуси. Показана необходимость лесного менеджмента в современных условиях глобализации, интеграции, международной торговли и рыночной экономики. Представлены основные этапы разработки политики лесного менеджмента Беларуси.
Автор не известен, “Бодра смяна” 1, 5300 Габрово, Болгария, 21с.
Настоящий каталог охватывает все детали, из которых произведены электротельферы типа Т и Т2 – специальные исполнения. Для удобства пользования каталог разделен на 10 групп.
Расположение иллюстраций и номенклатурная последовательность зависят от функционального назначения деталей и порядка их монтажа. Установленная...
Автор не известен, “Балканско ехо”, с. Кръвеник, 17с.
Настоящий каталог охватывает все детали, из которых произведен электротельфер типа ВЕ грузоподъемностью до 10кН.
Каталог является сборным для всех конструктивных решений цепных электротельферов грузоподъемностью до 10кН. поэтому, при определении необходимых Вам частей, следует правильно указать их наименование и спецификацию...
Автор не известен, „Балканско ехо” ЕООД, Кръвеник, 22 стр.
Цепные электротельферы конструированы, испытаны и приводятся в действие в соответствии с европейскими нормативами, как и согласно требованиям FE и секции IX и DIN. Электротельферы с цепью в качестве грузонесущего органа, предлагаются в двух основных вариантах - стационарная подвеска и для передвижения по рельсовому пути.
Автор не известен, “Балканско ехо”, Кръвеник, 40с.
Настоящий каталог относится к всем частям, которыми изготовляются электротельферы типа МТ.
В таблицах указаны номера фигур и позиции, а на противоположной стороне – наименование, число, номер по каталогу конкретнего изготовления. Если в данной группе или подгруппе только одна иллюстрация, она может быть цитирована после...
Автор не известен. “Балканско ехо”, Кръвеник. 39с.
Канатные электротельферы типа “ВТ” являются унифицированными подъемно – транспортным оборудованием и служат для подъема, перемещения и опускания товаров в различных отраслях промышленности и экономики.
Электротельферы типа “ВТ” используются для механизации внутри заводского транспорта, для работы на складах, строительных...
Procter Consultancy Limited, 2000, 132 pages.
This Standard covers the inspection and repair of drillstring components that may be used by a North Sea Operator. For purposes of this Standard, the drillstring is assumed to extend from the drill bit connection up to but not including the top drive or kelly. The objective
of this document is to specify inspection and repair...
American Society for Testing and Materials (ASTM). 1997, 4 pages.
This guide covers techniques for conducting acoustic emission (AE) examinations of small parts. It is confined to test
objects (or defined regions of larger objects) where there is low AE signal attenuation throughout the test region. This eliminates
the consideration of complex attenuation factor corrections and...
American Society for Testing and Materials (ASTM). 1997, 13 pages.
Purpose—This guide covers a tutorial introduction to familiarize the reader with the operational capabilities and
limitations inherent in X-ray Compton Scatter Tomography (CST). Also included is a brief description of the physics and
typical hardware configuration for CST.
American Society for Testing and Materials (ASTM). 1997, 12 pages.
This test method covers guidelines for acoustic emission (AE) examinations of new and in-service aboveground storage
tanks of the type used for storage of liquids. This test method will detect acoustic emission in areas of sensor coverage that are stressed during the course of the test. For flat-bottom tanks...
American Society for Testing and Materials (ASTM). 1997, 7 pages.
This guide covers procedures for the contact ultrasonic examination of bulk materials or parts by transmitting pulsed
ultrasonic waves into the material and observing the indications of reflected waves. This guide covers only examinations
in which one search unit is used as both transmitter and receiver...
American Society for Testing and Materials (ASTM). 1997, 3 pages.
These test methods cover procedures for measuring and compensating for transmittance when using an infrared imaging
radiometer to measure the temperature of a specimen through an attenuating medium, such as a window, filter or atmosphere
American Society for Testing and Materials (ASTM). 1997, 9 pages.
This test method covers guidelines for acoustic emission (AE) tests of pressurized containers made of fiberglass reinforced
plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals.
American Society for Testing and Materials (ASTM). 1997, 3 pages.
These test methods cover procedures for measuring and compensating for reflected temperature when measuring the
surface temperature of a specimen with an infrared imaging radiometer.
American Society for Testing and Materials (ASTM). 1996, 3 pages.
This practice covers the radiological examination of unique materials or processes, or both, for which conventionally
designed image quality indicators (IQIs), such as those described in Practices E 747 and E 1025, may be inadequate in
controlling the quality and repeatability of the radiological image.
American Society for Testing and Materials (ASTM). 1996, 10 pages.
This practice covers procedures for the use of electromagnetic acoustic transducers (EMATs) for specific ultrasonic
examination applications. Recommendations are given for specific applications for using EMAT techniques to detect
flaws through both surface and volumetric inspections as well as to measure...
American Society for Testing and Materials (ASTM). 1996, 6 pages.
This test method covers a procedure for determination of the performance of film systems used for industrial radiography.
This test method establishes minimum requirements that correspond to system classes
Departement of Army, USA, 1979, 60 pages.
The M16A1 rifle system consists a rifle, one magazine ana a sling. It is a lightweight, gas operated, air cooled, magazine fed, shoulder fired weapon that can be fired either automatic or semi-automatic.
Руководство по эксплуатации штурмовой винтовки M16A1
The International Organization for Standardization (ISO). 1993, 7 pages. This International Standard specifies methods for inspection and repair of solid-section fork arms in use on all types of fork-lift trucks.
New York: Cupples & Leon Company, 1915. — 258 p.
Aeroplanes was written by J. S. Zerbe in 1915. This is a 251 page book, containing 47527 words and 73 pictures. Search Inside is enabled for this title.
This work is not intended to set forth the exploits of aviators nor to give a history of the Art. It is a book of instructions intended to point out the theories of flying, as...
London: CROSBY LOCKWOOD AND SON, 1919. — 154 p.
The articles embodied with other matter in this book, were intended as a broad survey of the principles and details of modem aeroplane construction, concerning which there is a noticeable deficit amongst existing aeronautical literature. They were written at a time when specific references to modern British aircraft were...
London: Chapman & Hall, 1911, 330 pages.
The rock drill, perhaps more than any other instrument, except the engineers transit, is the tool that accompanies the vanguard of civilization, and its contribution to the general economy of construction, its effect upon the cost of rock work, and its influence on standard engineering methods, have been enormous. In principle it is unique...
American Society for Testing and Materials (ASTM). 1996, 4 pages.
This practice covers a uniform procedure for the examination of castings by the computed tomography (CT) technique.
The requirements expressed in this practice are intended to control the quality of the nondestructive examination by CT
and are not intended for controlling the acceptability or quality of the...
American Society for Testing and Materials (ASTM). 1998, 7 pages.
This practice covers requirements for the secondary calibration of acoustic emission (AE) sensors. The secondary
calibration yields the frequency response of a sensor to waves of the type normally encountered in acoustic emission work.
The source producing the signal used for the calibration is mounted on the...
American Society for Testing and Materials (ASTM). 1996, 8 pages.
This guide is intended primarily for tutorial purposes. It provides an overview of the general principles governing the
operation and use of electromagnetic acoustic transducers (EMATs) for ultrasonic examination.
American Society for Testing and Materials (ASTM). 1995, 11 pages.
This practice establishes the minimum requirements for radiographic examination for metallic and nonmetallic materials.
American Society for Testing and Materials (ASTM). 1995. 5 pages. This practice covers a procedure for acousto-ultrasonic (AU) assessment of filament-wound pressure vessels. Guidelines are given for the detection of defect states and flaw populations that arise during materials processing or manufacturing or upon exposure to aggressive service environments. Although this...
Учебное пособие. — М.: Госгортехиздат, 1961. — 244 с.: ил.
В книге обобщен и систематизирован современный опыт проектирования и монтажа надшахтных копров. Дана характеристика элементов подъемной установки и связь копра с ними, а также классификация копров по видам материала, системам, количеству и расположению подъемных машин. Рассмотрены нагрузки, действующие на копер, дана...
Кемеровское книжное издательство, 1978, 239 стр.
Первая попытка обобщить и систематизировать опыт разведки угольных месторождений Кузнецкого бассейна. Описаны основные геологические особенности бассейна. Главные факторы, определяющие методику разведки,— тектоническое строение и характер угленосности месторождений. По первому признаку разведочные участки разделены на простые,...
Scranton International textbook company, 1907, 484 pages
The International Library of Technology is the outgrowth of a large and increasing demand that has arisen for the
Reference Libraries of the International Correspondence Schools on the part of those who are not students of the
Schools. As the volumes composing this Library are all printed from the same platesused in...
London: The Mashinery Publishing co. Ltd., 1919, 245 pages.
A Treatise on the Use of Various Type of Single - and Multiple - Sindle Drilling Machines, Including Their Application to Standard and Special Operations, the Relation of Speeds and Feeds to Intensive Production, and the Different Types of Tools and Fixtu.
During recent years, a number of important changes have been...
University of Illinois, 1903. — 80 p. The pumping of water has come to be a very important factor in modern civilization. Towns and cities must have water for household purposes, for power plants, and for extinguishing fires. In many cases it might be taken from surface streams or lakes, but as the same mains furnish the supply for all purposes, it has to be obtained from a source...
London: Crosby Lockwood and son, 1900, 171 pages.
A Practical Handbook on the Use of Modern Diamond Core Drills in Prospecting and Exploiting Mineral-Bearing Properties, Including Particulars of the Cost of Apparatus and of Working
The rapid strides made in recent years in the perfecting of the Diamond Drill, and its now general use in prospecting for mineral and metalliferous...