Det Norske Veritas (DNV). — May 2017. — 123 p. This document supersedes the January 2015 of DNV-RP-F101. The purpose of the revision of this service document is to comply with the new DNV GL document reference code system and profile requirements following the merger between DNV and GL in 2013. Changes mainly consist of updated company name and references to other documents...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME PCC-2-2018. Date of Issuance: December 31, 2018. 294 р. This Standard provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards1 after they have been placed in service. These repair methods include relevant design,...
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2002. — 40 p. Стандарт ассоциации NACE International составлен на основе согласованного мнения специалистов – членов ассоциации, изучивших данный документ, сферу его применения и оснащение. Принятие стандарта не запрещает производство, сбыт, покупку или использование не...
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2000. — 28 p. This NACE International standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. Its acceptance does not in any respect preclude anyone, whether he has adopted the standard or not, from...
Данный документ является переводом NACE 35100-2000 In-Line Inspection of Pipelines на русский язык. 39 с. Внутритрубная дефектоскопия (ВТД) имеет большое значение для обследования состояния трубопровода. Она является важной составляющей работ по обеспечению целостности трубопровода; на основе анализа данных разрабатывается программа качества данных работ для поддержания...
An American National Standard. National Association of Corrosion Engineers (NACE) International. — Houston, TХ. 2012. — 42 p. Analyzes available and emerging technologies in the field of in-line pipeline inspection tools and reviews their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B31.8S-2016. Date of Issuance: November 28, 2018. 78р. This Code applies to onshore pipeline systems constructed with ferrous materials and that transport gas. The principles and processes embodied in integrity management are applicable to all pipeline systems. This Code is...
ASME B31.8-2018 Gas Transmission and Distribution Piping Systems Ревизия ASME B31.8-2016 Год издания - 2018 Язык - английский Страниц - 206 Формат - PDF The B31.8 covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. Also covers safety aspects of the operation and maintenance of those facilities.
This British Standard is the UK implementation of EN 13018:2016. 12p. February 2016 Supersedes EN 13018:2001 It supersedes BS EN 13018:2001 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/46, Non-destructive testing. A list of organizations represented on this committee can be obtained on request to its secretary. This...
First edition 2012-04-01 22p. This International Standard defines the principles for tandem- and longitudinal-longitudinal-transverse (LLT) wave examination for the detection of discontinuities perpendicular to the surface. The general principles required for the ultrasonic examination of industrial products are described in ISO 16810. A list of symbols and equations is given in...
First edition 2012-04-01 24p. This International Standard specifies methods and acceptance criteria for assessing the performance of instruments formeasuring thickness using pulse-echo ultrasound. This International Standard covers both direct (digital) reading and waveform display types using single or dual element probes. This International Standard can be used for verifying...
First edition 2012-04-01 60p. This document specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. It is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810.
First edition 2012-04-01 14p This International Standard specifies the principles of transmission techniques. Transmission techniques can be used for: ⎯ detection of imperfections; ⎯ determination of attenuation. The general principles required for the use of ultrasonic examination of industrial products are described in ISO 16810. The transmission technique is used for...
First edition 2012-04-01 46p This International Standard specifies the general rules for setting the timebase range and sensitivity (i. e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible measurements may be made of the location and echo height of a reflector. It is applicable to techniques employing a single contact...
First edition 2012-04-01 18p This International Standard defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound. The specific conditions of application and use of ultrasonic examination, which depend on the type of product examined, are described in documents which could include: ⎯ product standards;...
First edition 2012-04-01 26p This International Standard defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can also be used for other types of materials, provided the application of the TOFD technique is performed with necessary...
THIRD EDITION, FEBRUARY 2018 28p. The purpose of this recommended practice (RP) is to provide guidelines for an owner/user to develop and implement a material verification program (MVP) as part of an asset integrity program. The MVP uses positive material identification and other methods to verify that the nominal composition of an asset, an asset component, or weldment within...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B16.14-2010 Date of Issuance: July 29, 2013. 28 p. This Standard for Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads covers: (a) pressure-temperature ratings; (b) size; (c) marking; (d) materials; (e) dimensions and tolerances; (f) threading; and (g) pattern taper.
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B16.12-1998 (R2006). Date of Issuance: April 6, 2009. 36 р. This Standard for cast iron threaded drainage fittings: (a) size' and method of designating openings in reducing fittings (b) marking (c) materials (d) dimensions' and tolerances (e) threading (f) ribs (g) coatings (h)...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B16.1-2010. Date of Issuance: July 29, 2015. 70p. This Standard covers Classes 25, 125, and 250 Gray Iron Pipe Flanges and Flanged Fittings. It includes: (a) pressure-temperature ratings; (b) sizes and method of designating openings of reducing fittings; (c) marking; (d)...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B16.1-2005. Date of Issuance: November 17, 2010. 72p. This Standard covers Classes 25, 125, and 250 Gray Iron Pipe Flanges and Flanged Fittings. It includes: (a) pressure-temperature ratings; (b) sizes and method of designating openings of reducing fittings; (c) marking; (d)...
2nd Edition. — American Petroleum Institute (API). — April 2013. — 90 p. This standard serves as an umbrella document to be used with and complement companion standards. NACE SP0102, In-line Inspection of Pipelines and ASNT ILI-PQ, In-line Inspection Personnel Qualification and Certification all have been developed enabling service providers and pipeline operators to provide...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B31.8S-2014. Date of Issuance: October 31, 2016. 78р. This Code applies to onshore pipeline systems constructed with ferrous materials and that transport gas. The principles and processes embodied in integrity management are applicable to all pipeline systems. This Code is...
ASME B31.8-2016 Gas Transmission and Distribution Piping Systems Ревизия ASME B31.8-2014 Год издания - 2016 Язык - английский Страниц - 214 Формат - PDF The B31.8 covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. Also covers safety aspects of the operation and maintenance of those facilities.
Разработан ООО «Газпром ВНИИГАЗ» Взамен СТО Газпром 2-2.1-131-2007 Настоящий стандарт организации входит в состав нормативного обеспечения проектирования, строительства и эксплуатации объектов ОАО «Газпром», разрабатываемого в соответствии с пунктом 5.5 «Технологии, обеспечивающие повышение эффективности магистрального транспорта газа, диверсификацию способов поставок газа...
Издательство ОАО «Газпром», 2009, М. 59стр Настоящий стандарт разработан в комплексе с СТО Газпром 2-2.3-327-2009 «Оценка напряженно-деформированного состояния технологических трубопроводов компрессорных станций», СТО Газпром 2-2.3-324-2009 «Диагностическое виброобследование технологических трубопроводов компрессорных цехов с центробежными нагнетателями. Нормы оценки и методы...
Настоящий стандарт разработан в комплексе с СТО Газпром 2-2.3-220-2008 «Методика
мониторинга напряженно-деформированного состояния трубопроводных систем «высокой
стороны» КС», СТО Газпром 2-2.3-243-2008 «Инструкция по проведению измерений напряжений
в металле трубопроводов при использовании приборов, основанных на магнитошумо-
вом методе» и Р Газпром 2-2.3-267-2008 «Методика...
American Petroleum Institute (API). THIRD EDITION, NOVEMBER 2009. 78p. This recommended practice describes the inspection and repair practices for automatic pressure-relieving devices commonly used in the oil and petrochemical industries. As a guide to the inspection and repair of these devices in the user's plant, it is intended to ensure their proper performance. This...
122 стр. c Приложением
Annex A (informative) External Inspection Checklist for Process Piping
FOURTH EDITION, NOVEMBER 2016
This recommended practice (RP) supplements API 570 by providing piping inspectors with information that
can improve skill and increase basic knowledge of inspection practices. This RP describes inspection
practices for piping, tubing, valves (other than...
154 стр. c Приложениями
Annex A (informative) Exchangers
Annex B (informative) Towers
Annex C (informative) Sample Record Forms
FOURTH EDITION, DECEMBER 2016
This recommended practice (RP) covers the inspection of pressure vessels. It includes a description of the various types of pressure vessels (including pressure vessels with a design pressure below 15 psig) and the...
American Petroleum Institute (API). THIRD EDITION, OCTOBER 2013. 120p. This recommended practice covers the inspection practices for fired boilers and process heaters (furnaces) used in petroleum refineries and petrochemical plants. The practices described in this document are focused to improve equipment reliability and plant safety by describing the operating variables which...
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2000. 35p.
Analyzes available and emerging technologies in the field of in-line pipeline inspection tools and reviews their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new and...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ANSI/ASME B31G -1984. Reaffirmed 2004
Date of Issuance: Jule 27, 1991. 67 р.
This document is intended solely for the purpose of providing guidance in the evaluation of metal loss in pressurized pipelines and piping systems. It is applicable to all pipelines and piping systems within...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B31G -2009. Date of Issuance: October 24, 2012. 64 р. This document is intended solely for the purpose of providing guidance in the evaluation of metal loss in pressurized pipelines and piping systems. It is applicable to all pipelines and piping systems within the scope of the...
The DNV Recommended Practice for the assessment of corroded pipelines, DNV-RP-F101 was issued in 1999 (editorial office 2015), and has been used with success in many projects. In this paper the development of the RP is outlined, the determination of the safety factors are explained and the sensitivity of the safety level to the various parameters is demonstrated. RP-F101 includes...
The DNV Recommended Practice for the assessment of corroded pipelines, DNV-RP-F101 was issued in 1999 (editorial office 2010), and has been used with success in many projects. In this paper the development of the RP is outlined, the determination of the safety factors are explained and the sensitivity of the safety level to the various parameters is demonstrated. RP-F101 includes...
Det Norske Veritas (DNV). October 2013. 372p, This standard gives criteria and guidance on concept development, design, construction, operation and abandonment of Submarine Pipeline Systems.
Det Norske Veritas (DNV). October 2010. 238p, This standard gives criteria and guidance on concept development, design, construction, operation and abandonment of Submarine Pipeline Systems.
М.: Министерство строительства и ЖКХ РФ, 2014. - с. 182. Отменен на основании Приказа Минстроя России от 14.04.2022 № 285/пр "Об утверждении СП 86.13330.2022 "СНиП III-42-80* Магистральные трубопроводы". Настоящий свод правил распространяется на строительство новых и реконструкцию действующих магистральных трубопроводов и ответвлений от них номинальным диаметром до DN 1400...
Издание 4. 2016г
Язык: Английский
Страниц: 88
Формат: PDF
Обзор:
Стандарт API 570 регламентирует процедуры контроля, ремонта, модернизации и реклассификации металлических трубопроводных систем, подвергавшихся эксплуатации.
Стандарт API 570 разработан для нефтеперерабатывающей и нефтехимической отраслей, но мо-жет использоваться, если он практически применим, в отношении...