An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2002. — 40 p. Стандарт ассоциации NACE International составлен на основе согласованного мнения специалистов – членов ассоциации, изучивших данный документ, сферу его применения и оснащение. Принятие стандарта не запрещает производство, сбыт, покупку или использование не...
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2000. — 28 p. This NACE International standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. Its acceptance does not in any respect preclude anyone, whether he has adopted the standard or not, from...
Данный документ является переводом NACE 35100-2000 In-Line Inspection of Pipelines на русский язык. 39 с. Внутритрубная дефектоскопия (ВТД) имеет большое значение для обследования состояния трубопровода. Она является важной составляющей работ по обеспечению целостности трубопровода; на основе анализа данных разрабатывается программа качества данных работ для поддержания...
An American National Standard. National Association of Corrosion Engineers (NACE) International. — Houston, TХ. 2012. — 42 p. Analyzes available and emerging technologies in the field of in-line pipeline inspection tools and reviews their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new...
Editorial Revision. — National Association of Corrosion Engineers, 1984. — 27 p. This Standard covers metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flow llne equipment, and field processing facllltles to be used In H2S bearing hydrocarbon service. This Standard applies to the materials used for...
National Association of Corrosion Engineers, 1992. — 30 p. This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipmen, and field processing facilities to be used in H 2 S- bearing hydrocarbon service.
National Association of Corrosion Engineers, 1972. — 7 p. This Recommended Practice Standard presents a method for applying catalyzed coal tar epoxy coating to the interior of lease production tanks used primarily for the storage of corrosive fluids produced in the petroleum production industry. All phases of the lining process are presented, including material properties,...
National Association of Corrosion Engineers, 1978. — 8 p. This Recommended Practice provides guidelines for the design, fabrication, and surface finish of tanks that are to be lined for corrosion resistance or to prevent product contamination in chemical immersion service. Suggestions are given in Appendix B for the responsibilities of the purchaser (user), fabricator, and...
NACE International. 1440 South Creek Dr. Хьюстон, TX 77084-4906. Тел. +1 281-228-6200. Факс +1 281-228-6300. E-mail msd@mail.nace.org. Web www.nace.org. Напечатано в США NACE. Первое издание 2003-12-15. Данная часть 3 Стандарта ISO15156 устанавливает требования и дает рекомендации по выбору и пригодности трещиностойких коррозионностойких и других марок сплавов для оборудования,...
The objective of this technical committee report is to provide a state-of-the-art overview of the materials selection, fabrication, postweld heat treatment (PWHT), inspection, and testing practices that have recently been applied to new pressure vessels (referred to in this report as equipment) destined for use in wet hydrogen sulfide (H2S) refinery service.
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2000. 35p.
Analyzes available and emerging technologies in the field of in-line pipeline inspection tools and reviews their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new and...
NACE SP0572-2007 Standard Recommended Practice - Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Beds standard by National Association of Corrosion Engineers 07/01/2007, 18 pages, languages- English
S.J. Mishael,ChevronTexaco Dr. F.W.H. Dean, Ion Science Dr. C. Fowler,Bodycote Laboratories, 2004 Abstract Introdution Hydrogen blistering case history Predicting permeation Fracture toughness testing steel exposed to sour solutions Hydrogen activity
Deli Duan,Yoon-Seok Choi, Shengli Jiang,Srdjan Nešić Institute for Corrosion and Multiphase Technology, Department of Chemical and Biomolecular Engineering, Ohio University 342 West State Street Athens, OH, 45701 USA, 2013 Abstract Introdution Experimental procedure Results Conclusions Acknowledgements
Ханс ван ВОРТЕЛЬ, 2007
Де Rondom 1, 5600 HE, Эйндховен, Нидерланды
Краткое описание
Введение
Определение повреждений,связанных с релаксационным растрескиванием
Предельные условия
Объем программы JIP
Результаты исследования
Выводы
Hans van Wortel De Rondom 1, 5600 HE, Eindhoven, the Netherlands, 2007 Abstract Identificatin of relaxation failures Limiting conditions Extent of the jip programme Overwiev results Discussions Conclutions
National Association of Corrosion Engineers (NACE) International. Houston, TХ. Reaffirmed 2007-03-15. 36 p. ISBN: 1-57590-035- 1. This standard presents acknowledged practices for the control of external corrosion on buried or submerged steel, cast iron, ductile iron, copper, and aluminum piping systems
National Association of Corrosion Engineers (NACE) International. Houston, TХ. Approved December 11, 2008. 60p. ISBN: 1-57590-156- 1. This standard covers the NACE external corrosion direct assessment (ECDA) process for buried onshore ferrous piping systems. This standard is intended to serve as a guide for applying the NACE ECDA process on typical pipeline systems. This...
SSPC-PA 2,May 1, 2004, 11 стр.
This standard describes the procedures to measure the thickness of a dry fi lm of a nonmagnetic coating applied on a magnetic substrate using commercially available magnetic gages. These procedures are intended to supplement manufacturers’ operating instructions for the manual operation of the gages and are not intended to replace them.
SSPC-PA 1April 1, 2000 Editorial Revisions November 1, 2004 SSPC: The Society for Protective Coatings PAINT APPLICATION SPECIFICATION NO. 1, 14 стр. This specification covers procedures for the painting of steel surfaces. The scope of this specification is rather broad, covering both specific as well as general requirements for the application of paint. This specification does...
National Association of Corrosion Engineers (NACE) International, Houston, TX. 2011. 23p. ISBN: 1-57590-163-3 Provides a standard set of test conditions for consistent evaluation of pipeline and pressure vessel steels and compares test results from different laboratories pertaining to the results of the absorption of hydrogen generated by corrosion of steel in wet H2S....
This standard establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking,...
Standard Material Requirements. Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments. Этот стандарт определяет требования к материалоустойчивости в кислых и связанных с переработкой нефти сред, содержащих либо сероводород в виде газа или растворенные в воде смеси без наличия углеводородов. ISBN: 1-57590-168-4, 2005, NACE International, 23...
Настоящий стандарт посвящен испытанию металлов на сопротивление разрушению от растрескивания под действием механического напряжения и коррозии в водных средах, содержащих сероводород. 2005 год. 50 стр. на русском языке.