Зарегистрироваться
Восстановить пароль
FAQ по входу

Микро- и наносистемная техника

Теги, соответствующие этому тематическому разделу

Файлы, которые ищут в этом разделе

Доверенные пользователи и модераторы раздела

2nd Edition. — Springer, 2008. — 260 p. — ISBN-13 978-0387095356; ISBN-10 0387095357. MEMS Vibratory Gyroscopes provides a solid foundation in the theory and fundamental operational principles of micromachined vibratory rate gyroscopes, and introduces structural designs that provide inherent robustness against structural and environmental variations. In the first part, the...
  • №1
  • 13,68 МБ
  • добавлен
  • изменен
Springer International Publishing Switzerland, 2016. – 181 p. – ISBN-10: 3319277553. Presents guidelines to engineer functional properties of piezoelectric systems. Describes optimization processes to perform technological applications. Excellent thesis presented and defended at Technical University Darmstadt. This book addresses and analyzes the mechanisms responsible for...
  • №2
  • 7,88 МБ
  • добавлен
  • изменен
Artech House, 2010. — 213 p. Microelectromechanical systems (MEMS) are an emerging technology that has the potential for a multitude of uses. The sensors are low cost, low power consuming, and easily available. MEMS inertial sensors have introduced a new concept of affordability to inertial positioning and navigation, which have always been dedicated for special applications...
  • №3
  • 4,64 МБ
  • добавлен
  • изменен
Springer, 2004. — 510 p. — ISBN 978-3-642-05915-5. Direct Bonding, Fusion Bonding, Anodic Bonding, Wafer Bonding: A Historical Patent Picture of the Worldwide Moving Front of the State-of-the-Art of Contact Bonding Basics of Silicon-on-Insulator (SOI) Technology Silicon-on-insulator by the Smart Cut™ Process ELTRAN Technology Based on Wafer Bonding and Porous Silicon Wafer Bonding...
  • №4
  • 56,91 МБ
  • добавлен
  • изменен
[jpg]https://cloud.mail.ru/public/af690eeaffd8/Gosele.jpg[/jpg] Berlin, Heidelberg: Springer, 2004. — 499 p., 372 fig., 25 tables. — (Springer Series in Materials Science, vol. 75). — ISBN-10:3540210490, ISBN-13:9783540210498. Формат файла: PDF 1.4 (Acrobat 5 . x), открывается Acrobat Reader'ом. During the past decade direct wafer bonding has developed into a mature materials...
  • №5
  • 18,92 МБ
  • добавлен
  • изменен
Коллективная монография. Лондон, The Institution of Engineering and Technology, 2008 г. - 940 с. Серия: IET circuits, devices and systems series. Том. 18. Редакторы серии: Dr R.S. Soin. Dr D.G. Haigh. Professor Y. Sun. Рассматриваются вопросы разработки, создания и использования интегрированных систем типа "лаборатория на чипе". Подробно рассматривается разработка систем...
  • №6
  • 5,87 МБ
  • добавлен
  • изменен
384 p. 2010 Cambridge University Press, New York. Computer architecture is at a turning point. Radical changes occurred in the 1980s when the Reduced Instruction Set Computer (RISC) philosophy, spurred in good part by academic research, permeated the industry as a reaction to the Complex Instruction Set Computer (CISC) complexities. Today, three decades later, we have reached a...
  • №7
  • 13,07 МБ
  • добавлен
  • изменен
William Andrew, 2008. - 198 p. - This book discusses the main issues on fabrication, design, and applications of micromachined resonant devices as well as techniques that are commonly used for processing the output signal of resonant micro-electro-mechanical systems (MEMS). After a brief introduction to the concepts of resonance, an overview of the fabrication techniques for...
  • №8
  • 3,05 МБ
  • добавлен
  • изменен
CRC Press, Taylor & Francis Group, 2015. — XII, 169 p. — ISBN-13: 978-1-4822-5091-6 (eBook - PDF). The rapidly emerging fields of nanotechnology and nano-fabrication have enabled the creation of new sensors with dramatic improvements in sensitivity and range, along with substantial miniaturization. And, although there are many books on nanotechnology, recent advances in micro...
  • №9
  • 4,63 МБ
  • добавлен
  • изменен
Proceedings of the NATO Advanced Study Institute on Optical Chemical Sensors (Erice, Italy, 29 July - 10 August 2004). Springer, 2006. 549 p. ISBN-10 1-4020-4609-X In the summer of 2004, the NATO A.S.I. on the subject Optical Chemical Sensors was organised in Erice, Sicily. This NATO A.S.I. was the 40th Course of the International School of Quantum Electronics, under the...
  • №10
  • 10,59 МБ
  • дата добавления неизвестна
  • изменен
Wilеу-VСН, 2005. — 608 p. — ISBN 3-527-31080-0. Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind...
  • №11
  • 10,45 МБ
  • добавлен
  • изменен
Amsterdam: Elsevier, 2000. - 390 p. Some years ago, silicon-based mechanical sensors, like pressure sensors, accelerometers and gyroscopes, started their successful advance. Every year, hundreds of millions of these devices are sold, mainly for medical and automotive applications. The airbag sensor on which research already started several decades ago at Stanford University can...
  • №12
  • 15,15 МБ
  • добавлен
  • изменен
IEEE Press, 1997, 302 pages, ISBN 0-7803-1130-2 Capacitive sensors can solve many different types of sensing and measurement problems.They can be integrated into a printed circuit board or a microchipand offer noncontact sensing with nearly infinite resolution.They are used for rotary and linear position encoding, liquid level sensing, touch sensing, sensitive micrometers,...
  • №13
  • 25,11 МБ
  • добавлен
  • изменен
Artech House, 2004, 281 p. Язык - английский. МЭМС механические датчики. Данная книга посвящена обзору микроэлектромеханических преобразователей (МЭМС) на основе кремния. В введении в МЭМС определены некоторые из обычно используемых терминов, а также обсуждены причины использования кремния как одного из ключевых материалов в миниатюрных механических преобразователях. Глава 2...
  • №14
  • 13,94 МБ
  • дата добавления неизвестна
  • изменен
2nd Edition. — New York, USA, Taylor & Francis, Routledge, 2017. — 257 p. — ISBN 1138654205. In this second edition of Material Strategies in Digital Fabrication are new case studies, improved wayfinding, the inclusion of composites and plastics, and references to similar strategies between different projects. In 400 step-by-step diagrams dissecting 39 case studies in 10 countries...
  • №15
  • 211,25 МБ
  • добавлен
  • изменен
2nd Edition. — Elsevier Inc., 2013. XVII, 541 p. — ISBN: 978-1-4557-2550-2. Key Features . Authoritative reporting on the latest changes in microfluidic science, where microscopic liquid volumes are handled as ""microdrops"" and separately from ""nanodrops."". A methodical examination of how liquid microdrops behave in the complex geometries of modern miniaturized systems...
  • №16
  • 23,28 МБ
  • добавлен
  • изменен
William Andrew, 2008. - 464 p. - After spending over 12 years developing new microsystems for biotechnology – especially concerned with the microfluidic aspects of these devices – Jean Berthier is considered a leading authority in the field. Now, following the success of his book, Microfluidics for Biotechnology, Dr. Berthier returns to explain how new miniaturization techniques...
  • №17
  • 14,73 МБ
  • добавлен
  • изменен
Springer, 2019. — 273 p. — (Energy, Environment, and Sustainability). — ISBN 978-981-13-3289-0. This volume covers the various sensors related to automotive and aerospace sectors, discussing their properties as well as how they are realized, calibrated and deployed. Written by experts in the field, it provides a ready reference to product developers, researchers and students...
  • №18
  • 8,16 МБ
  • добавлен
  • изменен
Springer International Publishing, Switzerland, 2017. — 423 p. — (Microsystems and Nanosystems) — ISBN: 9783319286860 This book is meant to introduce piezoelectric microelectromechanical system (MEMS) resonators to a broad audience of engineers, graduate students, and researchers with the scope of offering a review of the field as well as generating excitement for future...
  • №19
  • 13,89 МБ
  • добавлен
  • изменен
Springer, 2016. — 176 p. — ISBN-10 331927175X. This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband...
  • №20
  • 9,09 МБ
  • добавлен
  • изменен
Springer, 2016. — 170 p. — ISBN-10 331927175X. This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband...
  • №21
  • 5,04 МБ
  • добавлен
  • изменен
Oxford University Press, 2008. — 346 p. Microfluidics is a young and rapidly expanding scientific discipline, which deals with fluids and solutions in miniaturized systems, the so-called lab-on-a-chip systems. It has applications in chemical engineering, pharmaceutics, biotechnology and medicine. As the lab-on-a-chip systems grow in complexity, a proper theoretical understanding...
  • №22
  • 3,90 МБ
  • добавлен
  • изменен
Springer, 2014. – 283 p. – ISBN: 978-1-4020-9310-4, DOI: 10.1007/978-1-4020-9311-1. Piezoelectric materials (and pyroelectrics and ferroelectrics) are used by industry in a very large range of applications. These include ultrasonic detectors, cleaners, imaging systems and sonar devices; ink-jet printer heads, diesel and gasoline fuel injectors for automobiles, trucks and vans;...
  • №23
  • 10,40 МБ
  • добавлен
  • изменен
Oxford University Press, 2 edition, 2001, pages: 603. Ideal for upper-level undergraduate or first-year graduate courses and as a handy reference for professionals, The Science and Engineering of Microelectronic Fabrication, Second Edition, provides a thorough and accessible introduction to the field of microfabrication. Revised and expanded in this second edition, the text...
  • №24
  • 25,07 МБ
  • добавлен
  • изменен
Boca Raton: CRC Press, 2013. — 478 p. За последние десять лет в отрасли микроэлектромеханических систем (МЭМС) произошел бурный рост. Их применение варьируется от акселерометров и гироскопов, используемых в автомобильной безопасности до высокоточных встроенных генераторов на кристалле для эталонных генераторов и мобильных телефонов. Книга "МЭМС: Фундаментальные технологии и...
  • №25
  • 64,33 МБ
  • добавлен
  • изменен
IOP Publishing Ltd, 2005, 334 pages, ISBN: 0750310030. It is becoming increasingly clear that the two-dimensional layout of devices on computer chips hinders the development of high-performance computer systems. Three-dimensional structures will be needed to provide the performance required to implement computationally intensive tasks. . 3-D Nanoelectronic Computer...
  • №26
  • 16,55 МБ
  • добавлен
  • изменен
Springer-Verlag, Berlin, 2007, 220 pages, ISBN: 3540496025 Solid-state systems are frequently classified according to their physical, structural or chemical properties. Such schemes are extremely helpful since properties related to any such classification are typically known and facilitate identifying solids with special material classes. The best-known examples of these...
  • №27
  • 5,88 МБ
  • добавлен
  • изменен
CRC Press, 2005, 536 pages. Microelectronic Packaging analyzes the massive impact of electrochemical technologies on various levels of microelectronic packaging. Traditionally, interconnections within a chip were considered outside the realm of packaging technologies, but this book emphasizes the importance of chip wiring as a key aspect of microelectronic packaging, and...
  • №28
  • 35,63 МБ
  • добавлен
  • изменен
Sрringer, 2005, 254 pages The field of Nanotechnology, which aims at exploiting advances in the fabrication and controlled manipulation of nanoscale objects, is attracting worldwide attention. This attention is predicated upon the fact that obtaining early supremacy in this field of miniaturization may well be the key to dominating the world economy of the 21st century, and...
  • №29
  • 4,75 МБ
  • добавлен
  • изменен
Springer, 2009. — 185 p. — ISBN: 1441902546. На англ. языке. The book will integrate various nano technologies on materials, devices and systems and identify key areas and results. The book will describe different design aspects for integrated systems on silicon, as well as on heterogeneous platforms including, but not limited to, electrical, optical, micromechanical and...
  • №30
  • 3,61 МБ
  • добавлен
  • изменен
Springer Science + Business Media, 2008, Pages: 421 This book investigates the development of networkable smart objects for Ambient Intelligence (AmI) with specific emphasis upon the implementation of the microsystems and nanoscale devices required to achieve effective smart systems. In this context, it seeks to investigate the challenges and potential solutions that will...
  • №31
  • 10,33 МБ
  • добавлен
  • изменен
Springer New York Heidelberg Dordrecht London, 2013. XI, 245 p. 101 illus., 86 illus. in color. — ISBN 978-1-4614-8516-2, ISBN 978-1-4614-8517-9 (eBook), DOI 10.1007/978-1-4614-8517-9. Provides comprehensive design guidance on piezoresistance Includes an overview of applications requirements Codifies the design of piezoresistors in MEMS Case study approach includes the...
  • №32
  • 5,39 МБ
  • добавлен
  • изменен
Springer, 2006. -349 p. (Springer Series in Advanced Microelectronics, vol. 24). This is the first compendium on silicon/glass microsystems made by deep wet etching and the first book with a detailed description of bonding techniques used in microsystem technology. Technological results presented in the book have been tested experimentally by the author and his team, and can be...
  • №33
  • 20,81 МБ
  • добавлен
  • изменен
Springer, 2009. - 614 p. - Silicon Devices and Process Integration covers state-of-the-art silicon devices, their characteristics, and their interactions with process parameters. It serves as a comprehensive guide which addresses both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions....
  • №34
  • 14,70 МБ
  • добавлен
  • изменен
Wiley, 2014. — 384 p. This book focuses on the chemistry of inkjet printing inks, as well to special applications of these materials. As is well-documented, this issue has literallyexploded in the literature in particular in the patent literature. After an introductory section to the general aspects of the field, the types and uses of inkjet printing inks are summarized...
  • №35
  • 1,25 МБ
  • добавлен
  • изменен
Springer, 2015. — 758 p. This book presents a comprehensive and up-to-date account of the theory (physical principles), design, and practical implementations of various sensors for scientific, industrial and consumer applications. This latest edition focuses on the sensing technologies driven by the expanding use of sensors in mobile devices. These new miniature sensors will be...
  • №36
  • 27,15 МБ
  • добавлен
  • изменен
Springer, 2003. — 590 p. — ISBN / ASIN: 0387007504. This volume covers many modern sensors and detectors. It is clear that one book cannot embrace the whole variety of sensors and their applications, even if it is called something like The Encyclopedia of Sensors. This is a different book, and the author’s task was much less ambitious. Here, an attempt has been made to generate...
  • №37
  • 14,31 МБ
  • дата добавления неизвестна
  • изменен
Springer, 2010. — 678 p. The Handbook's coverage of sensors is extensive, ranging from simple photodiodes to complex devices containing components in combination. It offers hard-to-find reference data on the properties of numerous materials and sensing elements and emphasizes devices that are less well-known, whose technology is still being refined, and whose use permits the...
  • №38
  • 11,76 МБ
  • добавлен
  • изменен
2nd Edition. — Artech House Inc, Boston, London, 2000. — 411p. — ISBN1-58053-398-1. Semiconductor sensors initially were developed to provide easier-tointerface, lower-cost, and more reliable inputs to electronic control systems. The microcontrollers at the heart of these systems have increased in complexity and capability while drastically achieving reduced cost per function....
  • №39
  • 3,04 МБ
  • добавлен
  • изменен
CRC Press, Taylor & Francis Group, 2 edition, 2006, 647 pages. As our knowledge of microelectromechanical systems (MEMS) continues to grow, so does The MEMS Handbook. The field has changed so much that this Second Edition is now available in three volumes. Individually, each volume provides focused, authoritative treatment of specific areas of interest. Together, they comprise...
  • №40
  • 43,50 МБ
  • добавлен
  • изменен
2006, CRC Press (Taylor & Francis Group). - 547 pp. The 3rd volume of 3 volume set: The MEMS Handbook, Gad-el-Hak, Mohammed (Ed). 2nd edition. As our knowledge of microelectromechanical systems (MEMS) continues to grow, so does The MEMS Handbook. The field has changed so much that this Second Edition is now available in three volumes. Individually, each volume provides...
  • №41
  • 26,07 МБ
  • добавлен
  • изменен
Hoboken, USA: JohnWiley & Sons, Inc., 2018. — 339 p. — ISBN 0471411396. Comprehensive look at mechanical molecular devices that mimic the behavior of man-made devices Molecular devices and molecular machines are individual molecules and molecular systems capable of providing valuable device-like functions. Many of them have distinct conventional prototypes and therefore can be...
  • №42
  • 27,08 МБ
  • добавлен
  • изменен
John Wiley & Sons, Inc., 2017. — 365 p. This book details flexible glass properties that enable use in emerging electronic and opto-electronic applications. Discussion includes flexible glass advantages compared to alternative substrate materials. Examples describe flexible glass in processes such as vacuum deposition, monolithic integration, printing, and roll-to-roll. Flexible...
  • №43
  • 6,49 МБ
  • добавлен
  • изменен
Springer, 2009. — 279 p. Hydrogels are a fascinating class of polymers which show an immense ability of swelling under the influence of temperature, pH value or concentrations of different species in aqueous solutions. The volume change can amount up to several hundred percent. This unique behaviour is already used in such applications like disposable diapers, contact lenses or...
  • №44
  • 6,48 МБ
  • добавлен
  • изменен
Springer, 2011. 1185 p. ISBN: 0387473165 MEMS Materials and Processes Handbook is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on 'Materials' and 'Processes'. The extensive 'Material Selection Guide' and a 'Material...
  • №45
  • 26,97 МБ
  • дата добавления неизвестна
  • изменен
ISTE Press - Elsevier, 2018. — 273 p. — ISBN 978-1-78548-282-3. This book concentrates on the modeling of diffusion processes and the behavior of modern integrated components, from material, to architecture. It goes through the process, the device and the circuit regarding today's widely discussed nano-electronics, both from an industry perspective and that of public entities....
  • №46
  • 27,26 МБ
  • добавлен
  • изменен
Designed for a graduate-level course in micromachined devices, or as an introduction to the field for practicing engineers, this book presents an overview of the field, beginning with-micromachining approaches and including all major categories of transduction. It examines the fabrication of individual devices through the study of design issues and provides examples of key...
  • №47
  • 20,28 МБ
  • добавлен
  • изменен
John Wiley & Sons, Inc. Hoboken, New Jersey, and Scrivener Publishing LLC, Salem, Massachusetts, 2014. — 427 p. — ISBN: 978-1-118-42379-0 This book facilitates the access to the various disciplines, highlighting their many points of contacts and making the clear the message that membrane-based sensors represent the future of the research in every field, including chemistry,...
  • №48
  • 7,68 МБ
  • добавлен
  • изменен
200 p. 2018 Springer International Publishing AG Micro-manufacturing and precision manufacturing entail the use of sophisticated techniques in order to attain special manufacturing requirements, such as precision machining and finishing of various DTM, bio and smart materials; micro-manufacturing of mechanical components; machining of intricate shapes and features; and precision...
  • №49
  • 7,15 МБ
  • добавлен
  • изменен
Springer Science + Business Media, 2010, Pages: 314 The main goal of this book is to review recent progress and current status of MEMS/NEMS technologies and devices. Several important areas are discussed: history of research in the field, device physics, examples of successful applications, sensors, materials and processing aspects. The authors who have contributed to the book...
  • №50
  • 36,62 МБ
  • добавлен
  • изменен
Springer, 2011. 304 p. ISBN-10:1441960171 The successful launch of viable MEMs product hinges on MEMS reliability, the reliability and qualification for MEMs based products is not widely understood. Companies that have a deep understanding of MEMs reliability view the information as a competitive advantage and are reluctant to share it. MEMs Reliability, focuses on the...
  • №51
  • 10,34 МБ
  • дата добавления неизвестна
  • изменен
Springer Berlin Heidelberg, 2004. — 138 p. — ISBN 978-3-642-05999-5. Experimental comparison of DNA libraries using microelectronic arrays Interlayer Exchange Coupling of Ferromagnetic Films Across Semiconducting Interlayers Magnetostrictive LC-circuits as mechanical sensors Chemical Nanolithography: Patterning and Chemical Functionalization of Molecular Monolayers Modeling,...
  • №52
  • 13,46 МБ
  • добавлен
  • изменен
CRC Press, 2016. — 450 p. This book introduces various advanced, smart materials and the strategies for the design and preparation for novel uses from macro to micro or from biological, inorganic, organic to composite materials. Selecting the best material is a challenging task, requiring tradeoffs between material properties and designing functional smart materials. The...
  • №53
  • 4,24 МБ
  • добавлен
  • изменен
Wiley, 2012. — 392 p. Whilst inkjet technology is well-established on home and small office desktops and is now having increasing impact in commercial printing, it can also be used to deposit materials other than ink as individual droplets at a microscopic scale. This allows metals, ceramics, polymers and biological materials (including living cells) to be patterned on to...
  • №54
  • 2,57 МБ
  • добавлен
  • изменен
CRC Press, 2012. — 740 p. — ISBN 978-1439836200. As rapid technological developments occur in electronics, photonics, mechanics, chemistry, and biology, the demand for portable, lightweight integrated microsystems is relentless. These devices are getting exponentially smaller, increasingly used in everything from video games, hearing aids, and pacemakers to more intricate...
  • №55
  • 31,63 МБ
  • добавлен
  • изменен
Springer, 2006. - 341 p. - Radio Design in Nanometer Technologies is the first volume that looks at the integrated radio design problem as a "piece of a big puzzle", namely the entire chipset or single chip that builds an entire wireless system. This is the only way to successfully design radios to meet the stringent demands of today’s increasingly complex wireless systems.
  • №56
  • 33,33 МБ
  • добавлен
  • изменен
William Andrew, 2015. — 444 p. Printing on Polymers: Fundamentals and Applications is the first authoritative reference covering the most important developments in the field of printing on polymers, their composites, nanocomposites, and gels. The book examines the current state-of-the-art and new challenges in the formulation of inks, surface activation of polymer surfaces,...
  • №57
  • 7,18 МБ
  • добавлен
  • изменен
Springer Science+Business Media,, 2007, 701 pages Nanofabrication and nanotechnology present a great challenge to engineers and researchers as they manipulate atoms and molecules to produce single artifacts and submicron components and systems. Micro and Nanomanufacturing provides a comprehensive treatment of established micro and nanofabrication techniques and addresses...
  • №58
  • 48,05 МБ
  • добавлен
  • изменен
Springer, 2018. — 566 p. This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials,...
  • №59
  • 22,06 МБ
  • добавлен
  • изменен
2nd ed. Springer. 2009. 389 p. When first published in 1989 this was the leading book on chemical sensors. Since then, many undergraduate textbooks on chemical sensors have been published, but no graduate ones. This book is the first advanced undergraduate/graduate textbook on chemical sensors, and as with the first edition it will also garner strong interest as a reference...
  • №60
  • 6,16 МБ
  • добавлен
  • изменен
The Institution of Engineering and Technology, 2016. — 465 p. Optical MEMS, or MOEMS, are MEMS (micro-electromechanical systems) merged with micro-optics. They allow sensing or manipulating optical signals on a very small size scale, using integrated mechanical, optical, and electrical systems, and encompass a wide variety of devices including optical switch, optical...
  • №61
  • 16,84 МБ
  • добавлен
  • изменен
Academic Press, 2017. — 458 p. — ISBN 978-0-12-811212-0. This book addresses all aspects of micromanufacturing technology, presenting detailed technical information and the latest research developments. The book covers fundamentals, theory, simulation models, equipment and tools design, practical micromanufacturing procedures, and micromanufacturing-related supporting systems,...
  • №62
  • 61,23 МБ
  • добавлен
  • изменен
Springer International Publishing, Switzerland, 2015. – 398 p. – ISBN: 3319078356 This book describes the physics of the second-generation quartz crystal microbalance (QCM), a fundamental method of analysis for soft matter at interfaces. From a device for measuring film thickness in vacuum, the quartz crystal microbalance (QCM) has in the past two decades evolved into a...
  • №63
  • 8,73 МБ
  • добавлен
  • изменен
582 p., Cambridge University Press 2013. Offering a consistent, systematic approach to capacitive, piezoelectric, and magnetic MEMS, this textbook equips students to design and develop practical, system-level MEMS models. Includes a concise yet thorough treatment of the underlying principles of electromechanical transduction. Makes extensive use of easy-to-interpret electrical...
  • №64
  • 15,81 МБ
  • добавлен
  • изменен
Singapore : World Scientific, 2014. — 266 c. Demands for high-performance micro/nano manipulations, from the manufacture of microelectronic and photonic devices, biomedical apparatus, nanoscience and nanotechnology, renewable energy, environment protection, and high-end appliances, have been rapidly increasing in recent years. However, there are very few books on ultrasonic...
  • №65
  • 25,85 МБ
  • добавлен
  • изменен
Final Report. — Fort Collins, Colorado: Department of Physics Colorado State University, 1981. — 92 p. The design of broad-beam industrial ion sources is described. The approach used emphasizes refractory metal cathodes and permanent-magnet multipole discharge chambers. Design procedures and sample calculations are given for the discharge chamber, ion optics, cathodes, and...
  • №66
  • 2,06 МБ
  • добавлен
  • изменен
InTech, 2012, 240 pages, ISBN: 9535101062 9789535101062. This book provides a current snapshot of the field of microfluidics as it relates to a variety of sub-disciplines. It is hoped that this book will serve as a useful resource for recent entrants to the field as well as for established practitioners. The chapters have been divided into three sections: Fluid Dynamics,...
  • №67
  • 27,32 МБ
  • добавлен
  • изменен
Cambridge University Press, 2011 - 475 p. - A practical and systematic overview of the design, fabrication and test of MEMS-based inertial sensors, this comprehensive and rigorous guide shows you how to analyze and transform application requirements into practical designs, and helps you to avoid potential pitfalls and to cut design time. With this book you'll soon be up to speed...
  • №68
  • 4,40 МБ
  • добавлен
  • изменен
Newnes, 2001. - 448 Pages. The leading professional guide to RF and microwave safety issues A practical handbook for all involved in electronic design and safety assessment, RF and Microwave Radiation Safety covers the problems of RF safety management, including the use of measuring instruments and methods, radiation hazards and risks resulting from electromagnetic...
  • №69
  • 4,95 МБ
  • дата добавления неизвестна
  • изменен
Springer Berlin Heidelberg, 2008. — 365 p. In this book, the fundamentals of chemical engineering are presented aiming to applications in micro system technology, microfluidics, and transport processes within microstructures. After a general overview on both disciplines and common areas, recent projects are shortly presented. The combination of different disciplines gives new...
  • №70
  • 36,28 МБ
  • добавлен
  • изменен
Wiley-VCH, Weinheim, 1999, 368 pages. Microcomponents and microdevices are increasingly finding application in everyday life. The specific functions of all modern microdevices depend strongly on the selection and combination of the materials used in their construction, i.e., the chemical and physical solid-state properties of these materials, and their treatment. The precise...
  • №71
  • 15,89 МБ
  • добавлен
  • изменен
William Andrew Publishing, 2006, 992 p. Язык - английский. МЭМС: Практическое руководство для конструирования, анализа и применения. Данное практическое руководство, написанное коллективом авторитетных специалистов и экспертов под ред. профессоров Яна Корвика и Оливера Пауля из Фрайбургского университета (Германия) призвано обеспечить доступ к всеобъемлющим ресурсам по МЭМС...
  • №72
  • 19,95 МБ
  • дата добавления неизвестна
  • изменен
Wiley, 2012. — 450 p. Inkjet-based Micromanufacturing Inkjet technology goes way beyond putting ink on paper: it enables simpler, faster and more reliable manufacturing processes in the fields of micro- and nanotechnology. Modern inkjet heads are per se precision instruments that deposit droplets of fluids on a variety of surfaces in programmable, repeating patterns, allowing,...
  • №73
  • 2,67 МБ
  • добавлен
  • изменен
Springer, 2009. — 350 p. Recent developments in the technology of silicon nanocrystals and silicon nanostructures, where quantum-size effects are important, are systematically described including examples of device applications. Due to the strong quantum confinement effect, the material properties are freed from the usual indirect- or direct-bandgap regime, and the optical,...
  • №74
  • 35,49 МБ
  • добавлен
  • изменен
Woodhead Publishing Limited, 2013. 355 p. — ISBN:978-0-85709-118-5, ISBN:978-0-85709-648-7. Micro Electro Mechanical Systems (MEMS) are miniature devices or machines which integrate elements such as actuators, sensors and a processor to form microsystems. The automotive sector is currently the biggest consumer of MEMS and this market, driven by safety legislation, is expected...
  • №75
  • 14,69 МБ
  • добавлен
  • изменен
Cambridge University Press, 2011. - 178 Pages. На англ. языке. Whether you are a student taking an introductory MEMS course or a practising engineer who needs to get up to speed quickly on MEMS design, this practical guide provides the hands-on experience needed to design, fabricate and test MEMS devices. You will learn how to use foundry multi-project fabrication processes...
  • №76
  • 4,14 МБ
  • добавлен
  • изменен
Nova Science Publishers, 2010, 185 pages, ISBN: 1616685700. Microfluidics deals with the behaviour, precise control and manipulation of fluids that are geometrically constrained to a small, typically sub-millimetre, scale. It is a multidisciplinary field intersecting engineering, physics, chemistry, microtechnology and biotechnology, with practical applications to the design of...
  • №77
  • 4,58 МБ
  • добавлен
  • изменен
Dordrecht: Springer. – 2006. – 290 p. While in some applications such as gas-flow sensors, the co-integration of a sensor with its surrounding electronics on a single chip is just an asset, co-integration is inescapable in other cases such as transistors-based pressure sensors or low-loss microwave circuits insulated from the substrate, on a membrane. Moreover, co-integration...
  • №78
  • 6,22 МБ
  • добавлен
  • изменен
Springer Science+Business Media, LLC, 2010, XIV, 454p. 604 illus., 302 illus. in color. — ISBN 978-0-387-77746-7, e-ISBN 978-0-387-77747-4, DOI 10.1007/978-0-387-77747-4. Describes how turbine generators, motor compressors, rocket motors and combustors have been used as energy sources at the MEMS scale. Discusses in great detail how to model and manage systems-level trade-offs...
  • №79
  • 20,12 МБ
  • добавлен
  • изменен
John H. Lau,‎ Cheng Kuo Lee,‎ C. S. Premachandran,‎ Yu Aibin. — McGraw-Hill Education, 2009. — 400 p. — ISBN 978-0-07-162792-4. A comprehensive guide to 3D MEMS packaging methods and solutions Written by experts in the field, Advanced MEMS Packaging serves as a valuable reference for those faced with the challenges created by the ever-increasing interest in MEMS devices and...
  • №80
  • 13,97 МБ
  • добавлен
  • изменен
The Royal Society of Chemistry, Cambridge, UK, 2015. — 593. — ISBN 978-1-84973-671-8. Over the last fifteen years acoustophoresis, i.e. the manipulation of particles by means of acoustic forces, in microfluidic structures has taken giant leaps forward. Much insight and improved understanding of these complex systems have been gained in all aspects, ranging from basic theory to...
  • №81
  • 10,38 МБ
  • добавлен
  • изменен
Cambridge University Press, 296 p., 2010, ISBN-13 978-0-511-69143-0. Explore the frontier of device engineering by applying optimization to nanoscience and device design. This cutting-edge work shows how robust, manufacturable designs that meet previously unobtainable system specifications can be created using a combination of modern computer power, adaptive algorithms, and...
  • №82
  • 4,76 МБ
  • добавлен
  • изменен
Springer International Publishing, Switzerland, 2017. — 465 p. — (Springer Series in Advanced Microelectronics 57) — ISBN 3319445847. This volume provides a comprehensive reference for graduate students and professionals in both academia and industry on the fundamentals, processing details, and applications of 3D microelectronic packaging, an industry trend for future...
  • №83
  • 21,20 МБ
  • добавлен
  • изменен
William Andrew: Elsevier, 2010. (Series "Micro & Nano Technologies"). Series Editor - J. Ramsden. xxxii, 636 p. Contents Overview: Impact of Silicon MEMS—30 Years After PART I: Silicon as MEMS Material PART II: Modeling in MEMS PART III: Measuring MEMS PART IV: Micromachining Technologies in MEMS PART V: Encapsulation of MEMS Components Appendix 1 - Common Abbreviations...
  • №84
  • 16,83 МБ
  • добавлен
  • изменен
World Scientific Publishing Company, 2009. — 345 p. Modern printing is based on digitizing information and then representing it on a substrate, such as paper, pixel by pixel. One of the most common methods of digital printing is through inkjet printers. The process of inkjet printing is very complicated, and the ink used must meet certain chemical and physicochemical...
  • №85
  • 2,79 МБ
  • добавлен
  • изменен
Malcovati P. , Baschirotto A. , D’Amico A. , Natale C. (Eds. ) Springer, 2009. 444 p. ISBN-10:9048136059 Sensors and Microsystems contains a selection of papers presented at the 14th Italian conference on sensors and microsystems. It provides a unique perspective on the research and development of sensors, microsystems and related technologies in Italy. The scientific values...
  • №86
  • 26,51 МБ
  • дата добавления неизвестна
  • изменен
The McGraw-Hill Publishing Companies, Inc., 2006. — 432 p. The Evolution of the Microprocessor: Describes the development of the microprocessor and how transistor scaling has driven its evolution. Computer Components: Discusses computer components besides the microprocessor and the buses through which they interact with the processor. Design Planning: Explains the overall steps...
  • №87
  • 6,13 МБ
  • добавлен
  • изменен
Apress, 2013 - 336p. - ISBN13: 978-1-4302-6013-4 На англ. языке Sensor Technologies: Healthcare, Wellness and Environmental Applications explores the key aspects of sensor technologies, covering wired, wireless, and discrete sensors for the specific application domains of healthcare, wellness and environmental sensing. It discusses the social, regulatory, and design...
  • №88
  • 8,12 МБ
  • добавлен
  • изменен
Wiley, 2008 - 404 p. Smart Sensor Systems discusses all of the important aspects of sensor systems, measurement techniques, microcontrollers, and testing and identification. Written with an applications focus, the book presents a number of case studies by renowned experts in the field. These case studies, along with a set of problems at the end of each chapter, enhance the...
  • №89
  • 14,48 МБ
  • добавлен
  • изменен
Oxide Thin Films, Multilayers, and Nanocomposites. by Paolo Mele (Editor), Tamio Endo (Editor), Shunichi Arisawa (Editor), Chaoyang Li (Editor), Tetsuo Tsuchiya (Editor). File Size: 11191 KB. Print Length: 316 pages. Publisher: Springer; 2015 edition (March 26, 2015). Publication Date: March 26, 2015. ASIN: B00V9NWUMI. This book provides a comprehensive overview of the...
  • №90
  • 18,09 МБ
  • добавлен
  • изменен
MEMS: Introduction and Fundamentals covers the theoretical and conceptual underpinnings of the field, emphasizing the physical phenomena that dominate at the micro-scale. It also explores the mechanical properties of MEMS materials, modeling and simulation of MEMS, control theory, and bubble/drop transport in microchannels. Chapters were updated where necessary, and the book also...
  • №91
  • 16,73 МБ
  • добавлен
  • изменен
William Andrew, 2008. - 328 p. - A wide range of applications in chemistry and biochemistry are driving the rapid development of microfluidics. This book focuses its attention on an important subtopic of microfluidics; mixing in microscale. It provides the fundamentals of transport effects in microscale including molecular diffusion, convection, and chaotic advection. The science...
  • №92
  • 6,21 МБ
  • добавлен
  • изменен
2nd Edition. — Woodhead Publishing, 2018. — 589 p. — (Woodhead Publishing Series in Electronic and Optical Materials). — ISBN 978-0-08-102055-5. This book, Second Edition highlights new, important developments in the field, including the latest on magnetic sensors, temperature sensors and microreaction chambers. The book outlines the industrial applications for smart sensors,...
  • №93
  • 46,76 МБ
  • добавлен
  • изменен
Butterworth-Heinemann, 1995. — 232 p. — ISBN 0 340 61457 9 Medical electronics, or more specifically the instrumentation used in physiological measurement, has changed significantly over the last few years. Developments in electronics technology have offered new and enhanced applications, especially in the areas of data recording and analysis and imaging technology. These...
  • №94
  • 8,83 МБ
  • добавлен
  • изменен
Wiley, 2003. 179 p. ISBN 0471233269 Society and industry worldwide continue to increase their reliance on the availability of accurate and current measurement information. Timely access to this information is critical to effectively meet the indication and control requirements of industrial processes, manufacturing equipment, household appliances, onboard automotive systems,...
  • №95
  • 1,71 МБ
  • дата добавления неизвестна
  • изменен
CRC Press, Taylor & Francis Group, 2006. VIII, 367 p. — ISBN 0-8247-2637-5. Features . Provides the first reference dedicated to employing MEMS in aerospace applications. Presents demonstrations of MEMS in past and current applications while looking ahead to future applications. Reviews the physical phenomena that dominate at the small scale along with micromachining and...
  • №96
  • 11,28 МБ
  • добавлен
  • изменен
Springer Dordrecht Heidelberg London New York, 2011, VIII, 214 p. — ISBN 978-90-481-9700-2, e-ISBN 978-90-481-9701-9, DOI 10.1007/978-90-481-9701-9 — (Intelligent Systems, Control and Automation: Science and Engineering, Vol. 44). State-of-the-art science Applicable to modern technology Fast developing field In recent years microelectromechanical systems (MEMS) have...
  • №97
  • 3,53 МБ
  • добавлен
  • изменен
Springer Science & Business Media, 2015. – 721 p. Digital Imaging targets anyone with an interest in digital imaging, professional or private, who uses even quite modest equipment such as a PC, digital camera and scanner, a graphics editor such as PAINT, and an inkjet printer. Uniquely, it is intended to fill the gap between the highly technical texts for academics (with access...
  • №98
  • 8,41 МБ
  • добавлен
  • изменен
2nd ed. — Elsevier, 2015. — 858 p. — ISBN: 0323311490, 9780323311496 Micromanufacturing Engineering and Technology, Second Edition, covers the major topics of micro-manufacturing. The book not only covers theory and manufacturing processes, but it uniquely focuses on a broader range of practical aspects of micro-manufacturing engineering and utilization by also covering...
  • №99
  • 64,22 МБ
  • добавлен
  • изменен
William Andrew, Elsevier, 2010, 414 pages. This book presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development),...
  • №100
  • 16,42 МБ
  • добавлен
  • изменен
Wiley-VCH, 2012. - 425 p. The focus behind this book on wafer bonding is the fast paced changes in the research and development in three-dimensional (3D) integration, temporary bonding and micro-electro-mechanical systems (MEMS) with new functional layers. Written by authors and edited by a team from microsystems companies and industry-near research organizations, this handbook...
  • №101
  • 6,12 МБ
  • добавлен
  • изменен
2nd ed. — Wiley, 2015. — 849 p. — ISBN 1118165063, 9781118165065. By helping students develop an intuitive understanding of the subject, Microelectronics teaches them to think like engineers. The second edition of Razavi’s Microelectronics retains its hallmark emphasis on analysis by inspection and building students’ design intuition, and it incorporates a host of new pedagogical...
  • №102
  • 5,94 МБ
  • добавлен
  • изменен
ISTE, 2007. - 536 pages Subjects covered: Pressure Sensors Optical Sensors Flow Sensors Intelligent Sensors and Sensor Networks Accelerometers and Inclinometers Chemical Sensors and Biosensors Level, Position and Distance Temperature Sensors Solid State Gyroscopes and Navigation Magnetic Sensors New Technologies and Materials
  • №103
  • 5,02 МБ
  • добавлен
  • изменен
337 pages, 2001 by Butterworth-Heinemann, 2nd ed. ISBN 0-7506-7280-3 This book examines various board-test techniques, relating how they fit into an overall product design/manufacturing/test strategy. It discusses economic, management, and technical issues, and attempts to weave them into a coherent fabric. Looking at that fabric as a whole is much more rewarding than paying...
  • №104
  • 22,97 МБ
  • добавлен
  • изменен
Springer Heidelberg Dordrecht London New York, 2011, XXII, 322 p. — ISBN 978-3-642-19488-7, e-ISBN 978-3-642-19489-4, DOI 10.1007/978-3-642-19489-4 — (RWTHedition). Many tables with equations required for calculations of basic elements Systematic description of most actuators and sensors in micro technique Includes exercises Characteristic curves of most actuators and sensors...
  • №105
  • 5,11 МБ
  • добавлен
  • изменен
Wiley-VCH Verlag GmbH & Co., Weinheim, Germany, 2018. — 567 p. — ISBN 3527341064. The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals,...
  • №106
  • 19,76 МБ
  • добавлен
  • изменен
Berlin: Springer-Verlag. – 2007. – 484 p. (Springer Series on Chemical Sensors and Biosensors. Methods and Applications 5) The book is intended to give a state-of-the-art overview of the recent achievements in the area of piezoelectric sensors. The focus lies on thickness shear mode (TSM) resonators, since this class of piezoelectric devices is most frequently used in physical...
  • №107
  • 8,76 МБ
  • добавлен
  • изменен
Oxford University Press, 2005, 301 pages, ISBN: 0198568649 Microfluidics deals with fluids flowing in miniaturized systems. It is a young discipline, which is expected to substantially expand over the next few years, stimulated by the considerable development of applications in the pharmaceutical, biomedical and chemical engineering domains. The book is an introduction to...
  • №108
  • 6,90 МБ
  • добавлен
  • изменен
InTech, 2013. — 233 p. На англ. языке. Reviewing state-of-the-art technologies and their future trends, this book focuses on the latest development of devices and fabrication processes in the field of these extremely miniaturized electromechanical systems. The book offers new knowledge and insight into design, fabrication, and packaging, as well as solutions in these aspects...
  • №109
  • 30,72 МБ
  • добавлен
  • изменен
Springer, 2008. - 422 p. (Series in Integrated Circuits and Systems). Wafer Level 3-D ICs Process Technology focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses alternative technology platforms for pre-packaging wafer level 3-D ICs, with an emphasis on wafer-to-wafer stacking. Driven by the need for improved...
  • №110
  • 14,31 МБ
  • добавлен
  • изменен
Springer, 2010. 207 p ISBN:3540439668 Intended as an introduction and reference for materials scientists and physicists, this book treats the fundamental physics of piezoleletric sensors. It begins with the elements of phenomenological crystal physics to develop a fundamental understanding of piezoelectricity. Subsequently the constitutive equations for elastic and electric...
  • №111
  • 2,74 МБ
  • дата добавления неизвестна
  • изменен
MDPI, 2017. — 230 p. This edition is a reprint of the Special Issue published online in the open access journal Micromachines from 2015–2016. The Special Issue of Micromachines entitled “Micro/Nano Devices for Chemical Analysis” presents a total of 17 papers, including three unique reviews and two communications. Four papers relate to the microfluidic-based sensing techniques;...
  • №112
  • 50,42 МБ
  • добавлен
  • изменен
511 pp, 2003 by Marcel Dekker, Inc. An overview of the field and recent developments in micropositioning technology are presented in Chapter 1 along with an overview of the materials to be presented in the text. Theoretical basics and practical materials, design and manufacturing considerations are covered in Chapters 2 through 4 and drive/control techniques are described in...
  • №113
  • 20,15 МБ
  • добавлен
  • изменен
New York: Springer, 2017. — 638 p. This textbook provides a comprehensive, fully-updated introduction to the essentials of nanometer CMOS integrated circuits. It includes aspects of scaling to even beyond 12nm CMOS technologies and designs. It clearly describes the fundamental CMOS operating principles and presents substantial insight into the various aspects of design...
  • №114
  • 24,25 МБ
  • добавлен
  • изменен
New York: Springer, 2014. — 509 p. The book presents cutting-edge research in the emerging fields of micro, nano and smart devices and systems from experts working in these fields over the last decade. Most of the contributors have built devices or systems or developed processes or algorithms in these areas. The book is a unique collection of chapters from different areas with...
  • №115
  • 15,87 МБ
  • добавлен
  • изменен
Wiley, 2008. — 285 p. For the last 50 years, the power of integrated circuits has continued to grow. However, this performance will end up reaching its physical limit. What new ways will then be available to develop even more powerful and up-to-date systems? This book introduces the principles of quantic computing, the use of nano-tubes in molecular transistors and ADN computing....
  • №116
  • 5,16 МБ
  • добавлен
  • изменен
249 pp. Springer Science+Business Media, LLC 2011 This book is intended for the practicing microelectromechanical sensor designer as well as engineers and engineering managers in other fields. This book provides an introduction to harsh environment sensor applications and silicon carbide microelectronics and microelectromechanical system technology for such applications. Namely,...
  • №117
  • 4,81 МБ
  • добавлен
  • изменен
Amsterdam, "Elsevier", 2005, -702 p. Without sensors most electronic applications would not exist-they perform a vital function, namely providing an interface to the real world. The importance of sensors, however, contrasts with the limited information available on them. Today's smart sensors, wireless sensors, and microtechnologies are revolutionizing sensor design and...
  • №118
  • 9,25 МБ
  • добавлен
  • изменен
Materials Science and Engineering R 56 (2007) 1–129 (Elsevier B.V. ) This paper provides a detailed overview of developments in transducer materials technology relating to their current and future applications in micro-scale devices. Recent advances in piezoelectric, magnetostrictive and shape-memory alloy systems are discussed and emerging transducer materials such as magnetic...
  • №119
  • 9,12 МБ
  • дата добавления неизвестна
  • изменен
458 p. 2015 Elsevier Ltd (Woodhead Publishing Series in Electronic and Optical Materials: Number 81) Unlike the cautious design practices of aircraft, the automotive industry, buildings, bridges, and machinery, microelectronic assemblies are designed to the very limit of the strength of their constituting materials. Failures of microelectronic assemblies are not uncommon and they...
  • №120
  • 18,64 МБ
  • добавлен
  • изменен
Springer-Verlag Berlin, 2012, 335 pages, ISBN: 3642224792. This book presents the fabrication of optoelectronic nanodevices. The structures considered are nanowires, nanorods, hybrid semiconductor nanostructures, wide bandgap nanostructures for visible light emitters and graphene. The device applications of these structures are broadly explained. The book deals also with the...
  • №121
  • 14,20 МБ
  • добавлен
  • изменен
ExLi4EvA, 2016. — 409 p. — ISBN: 9535127861 This book consists of multiple review chapters that aim to cover recent advances and new applications of microfluidics in biology, electronics, energy, and materials sciences. This book should be a useful for those who are eager to learn more about microfluidics as well as researchers who want to pick up new concepts and developments...
  • №122
  • 43,10 МБ
  • добавлен
  • изменен
Springer Science & Business Media, 2005. – 480 p. The book Smart Sensors and MEMS provides an unique collection of contributions on latest achievements in sensors area and technologies that have made by eleven internationally recognized leading experts from Czech Republic, Germany, Italy, Israel, Portugal, Switzerland, Ukraine and USA during the NATO Advanced Study Institute...
  • №123
  • 6,00 МБ
  • добавлен
  • изменен
Wiley-VCH, 2017. — 984 p. — ISBN 978-3527338320 (print), ISBN 978-3527687206 (epdf), ISBN 978-3527687176 (epub), ISBN 978-3527687183 (mobi), ISBN 978-3527687169 (obook). Unique in its integration of individual topics to achieve a full-system approach, this book addresses all the aspects essential for industrial inkjet printing. After an introduction listing the industrial printing...
  • №124
  • 181,20 МБ
  • добавлен
  • изменен
Wiley-VCH, 2017. — 984 p. — ISBN 978-3527338320 (print), ISBN 978-3527687206 (epdf), ISBN 978-3527687176 (epub), ISBN 978-3527687183 (mobi), ISBN 978-3527687169 (obook). Unique in its integration of individual topics to achieve a full-system approach, this book addresses all the aspects essential for industrial inkjet printing. After an introduction listing the industrial printing...
  • №125
  • 82,89 МБ
  • добавлен
  • изменен
New York: Springer, 2017. — 367 p. This book comprehensively and systematically introduces readers to the theories, structures, performance and applications of non-driven mechanical and non-driven micromechanical gyroscopes. The book is divided into three parts, the first of which mainly addresses mathematic models, precision, performance and operating error in non-driven...
  • №126
  • 8,76 МБ
  • добавлен
  • изменен
Wiley, 2017. – 338 p. – ISBN: 978-1-118-71796-7. A fully comprehensive examination of state-of-the-art technologies for measurement at the small scale: Highlights the advanced research work from industry and academia in micro-nano devices test technology Written at both introductory and advanced levels, provides the fundamentals and theories Focuses on the measurement...
  • №127
  • 21,93 МБ
  • добавлен
  • изменен
Woodhead Publishing Limited, 2008, 810 pages Many recent advances in technology have been associated with nanotechnology and the miniaturization of components, devices and systems. Microjoining has been closely associated with the evolution of microelectronic packaging, but actually covers a much broader area, and is essential for manufacturing many electronic, precision and...
  • №128
  • 37,05 МБ
  • добавлен
  • изменен
Woodhead Publishing, 2008. 1088 p. ISBN:1845691865 This comprehensive volume covers the latest developments in advanced dielectric, piezoelectric, and ferroelectric materials. Divided into eight parts, it explores high strain high performance piezo- and ferroelectric single crystals, electric field-induced effects and domain engineering, morphotropic phase boundary-related...
  • №129
  • 35,84 МБ
  • дата добавления неизвестна
  • изменен
Александрова О.А., Максимов А.И., Мараева Е.В., Матюшкин Л.Б., Мошников В.А., Мусихин С.Ф., Тарасов С.А. Синтез и самоорганизация квантовых точек сульфида свинца для люминесцентных структур, полученных методом испарения коллоидного раствора // Нано- и микросистемная техника. 2013. № 2. С. 19-23 Представлены результаты по получению наноматериалов, содержащих массивы...
  • №130
  • 507,92 КБ
  • добавлен
  • изменен
Монографія. — Київ: НТТУ КПІ ім. Ігоря Сікорського; Політехніка, 2018. — 396 с. В монографії систематизовані та викладені матеріали з основних методів, методик та засобів контролю параметрів якості функціональних покриттів у приладобудуванні. Розглянуто основні механізми та принципи дії пристроїв для фізико-аналітичного визначення основних параметрів та характеристик тонких...
  • №131
  • 8,99 МБ
  • добавлен
  • изменен
Монографія. — Київ : НТТУ «КПІ»; Політехніка, 2016. — 360 с. Систематизовано матеріали основних типів та властивостей покриттів, методів і засобів їх формування у приладобудуванні. Розглянуто основні механізми й моделі формування тонких покриттів, які наносять на різноманітні поверхні виробів точного приладобудування; а також основні стадії росту плівок та дефекти, які виникають в...
  • №132
  • 6,75 МБ
  • добавлен
  • изменен
Том 1 — М.: ДМК Пресс, 2001. — 544 с.: ил. — (Учебник). — Электронная версия 373 с. Том 2: Справочные сведения о наиболее известных и распространенных изделиях микромагнитоэлектроники. — М.: 2002. — 691 с. Распознано Посвящается новому направлению техники – микромагнитоэлектронике. Состоит из двух частей. В первой части в доступной форме излагаются принципы работы современных...
  • №133
  • 30,52 МБ
  • дата добавления неизвестна
  • изменен
Содержание: Назначение и принципы формирования импульсов с нано- и пикосекундным фронтами. Схемотехника формирователей с применением Ддрв,Дзлп и насыщающихся индуктивностей. Исследование промышленных диодов в качестве Ддрв иДзлп. Приёмы для повышения качественных параметров импульсов. Широкополосные делители тока и напряжения как измерительные элементы формирователей....
  • №134
  • 495,88 КБ
  • дата добавления неизвестна
  • изменен
М.: Энергоатомиздат, 1983. - 136 с., ил. Представлено одно из новейших направлений в создании пролупроводниковых тензометрических измерительных преобразователей, основанное на использовании технологии микроэлектроники. Рассмотрены физические , технологические и схемотехнические вопросы разработки интегральных тензопреобразователей. Для специалистов, работающих в области...
  • №135
  • 14,58 МБ
  • добавлен
  • изменен
М.: Техносфера, 2004, 528 с. В монографии подробно рассмотрены вопросы проектирования и применения, а также технологические аспекты производства разнообразных микроэлектромеханических устройств: переключателей, регулируемых индукторов и конденсаторов, фильтров, фазовращателей, линий передач и антенн, приведены преимущества и недостатки каждой отдельной конструкции и указаны...
  • №136
  • 5,16 МБ
  • дата добавления неизвестна
  • изменен
В.П. Василевич, А.М. Кисель, А.Б. Медведева, В.И. Плебанович, Ю.А. Родионов. — Полоцк: ПГУ, 2001 — 260 с. (книга не полностью, только 190 страниц). В монографии изложены основы химической обработки полупроводниковых пластин и технологии производства интегральных микросхем (ИМС). Проведена классификация загрязнений на поверхности пластин. Определено влияние каждого вида загрязнений...
  • №137
  • 13,78 МБ
  • добавлен
  • изменен
СПб., СПбИТМО, 2008 г. 100 стр. В учебном пособии рассмотрены процессы формирования микроструктурных элементов фотоники и информационных систем (MEMS и MEOMS), в том числе фотонных кристаллов, основанные на оптических методах: оптической литографии, голографии и фотоотверждения полимеров. Приведены основы современных технологий получения элементов и структур микронных,...
  • №138
  • 4,03 МБ
  • дата добавления неизвестна
  • изменен
Саратов: Изд-во Сарат. ун-та, 2009. 374.с. Глухова О.Е, Гороховский А.В., Жуков Н.Д., Климов Б.Н., Штыков С.Н., Щёголев С.Ю. Книга содержит анализ современных промышленных приложений нанотехнологии, получивших в литературе и официальных документах название «наноиндустрия». Рассмотрены все направления развития отечественной наноиндустрии: организационные, технологические,...
  • №139
  • 11,95 МБ
  • добавлен
  • изменен
М.: ДМК Пресс, 2018. — 140 с.: ил. Эволюционное развитие техники подошло к рубежу крупных изменений; открылись новые интересные задачи – разведка полезных ископаемых, предсказание землетрясений, сверхточное измерение положений железнодорожных путей и нефтепроводов, инновации в медицинской технике и др. В четырех тематических главах книги рассматриваются измерительные и силовые...
  • №140
  • 4,30 МБ
  • добавлен
  • изменен
Минск: Белорусский государственный университет информатики и радиоэлектроники (БГУИР), 2018. — 196 с. — ISBN 978-985-543-341-6. Предназначено для изучения второй части интегрированной дисциплины «Основы твердотельной электроники», которая состоит из технологической и приборной частей. Рассматривается физика работы, параметры и конструкции маломощных и силовых моно- и...
  • №141
  • 5,93 МБ
  • добавлен
  • изменен
Учеб. пособие. / Ф. Ф. Колпаков, Н. Г. Борзяк, В. И. Кортунов. - Харь-ков: Нац. аэрокосм. ун-т "Харьк. авиац. ин-т", 2006. - 82 с. Представлен систематизированный аналитический обзор основных современных зарубежных публикаций по тематике разработки и использования микроэлектромеханических устройств. Приведен обширный перечень базовых работ, а также изложен оригинальный...
  • №142
  • 1,75 МБ
  • дата добавления неизвестна
  • изменен
Таганрог, ТГТУ, 2009, 120 стр. В учебном пособии рассмотрены основные вопросы, затрагиваемые дисциплины «Компоненты микросистемной техники»: элементы и компоненты микросистем (MEMS. MEOMS), базовых физических принципах их функционирования, характеристиках, конструкциях и особенностях применения. Книга адресована аспирантам и студентам вузов, специализирующихся в области...
  • №143
  • 3,75 МБ
  • дата добавления неизвестна
  • изменен
Конспект лекций. — Красноярск: Сибирский Федеральный Университет, 2007. — 210 с. Сенсоры и микроактюаторы. Введение. Сенсоры. Сенсоры (продолжение). Сенсоры (окончание). Актюаторы. Актюаторы (продолжение). Актюаторы (окончание). Микромеханизмы и миниатюрные управляемые электронные и оптические компоненты. Управляемые микроэлектрорадиокомпоненты. Управляемые...
  • №144
  • 10,37 МБ
  • дата добавления неизвестна
  • изменен
Караганда: Изд-во КарГУ, 2010. — 96 с. Спец. курс «Микрофлюидные системы» предназначен для ознакомления учащихся с одной из важнейших и перманентных тенденций современного аналитического приборостроения – миниатюризацией. Рассмотрены микрофлюидные системы как основы аналитических приборов последнего поколения. Изучаются теоретические и практические основы современных микрочиповых...
  • №145
  • 1,16 МБ
  • добавлен
  • изменен
М.: Изд. МИФИ, 1989. - 80 с. Описание: Настоящее учебное пособие состоит из 9 глав, включающих задачи по анализу, расчету и проектированию аналоговых электронных схем, таких как усилители переменного и постоянного тока, операционные усилители, усилители с обратной связью и стабилизаторы напряжения. Данное пособие предназначено для студентов дневного и вечернего факультетов, а...
  • №146
  • 9,41 МБ
  • добавлен
  • изменен
Рассматриваются базовых принципов функционирования и конструирования механических и электромеханических элементов и устройств, реализуемых на микроуровне, а также основные технологии изготовления микроустройств. (Показаны основные маршруты изготовления, используемые в современных производствах)
  • №147
  • 4,83 МБ
  • дата добавления неизвестна
  • изменен
Учебное пособие. ― Таганрог: Изд-во ТРТУ, 2005. – 62 с. В учебном пособии рассмотрены сенсорные и актюаторные элементы и средства их проектирования. Детально разобраны технологии изготовления, конструкции и принципы функционирования. Также детально описаны лаборатории-на-кристалле, их принципы работы и применения. Таганрогский технологический институт. Для технических...
  • №148
  • 3,92 МБ
  • дата добавления неизвестна
  • изменен
Лекции: Введение. Основные понятия и термины. Параметры и характеристики микросистем. Чувствительные элементы для микросистем. Сенсорные компоненты МСТ. Пьезоэлектрические датчики. Сенсорные компоненты МСТ. Сенсорные компоненты МСТ. Сенсорные компоненты МСТ. Актюаторные элементы МСТ. Микромеханические ключи. Интегральные микрозеркала. Интегральные...
  • №149
  • 14,64 МБ
  • дата добавления неизвестна
  • изменен
Таганрог, ТГТУ (Технический Институт ЮФУ), 2007 г. - 27 с. В данной работе приведены примеры расчётов сенсоров и актюаторов по курсу «Микроэлектромеханика». Целью их выполнения является приобретение студентами практических навыков по расчету микромеханических элементов микросистемной техники с электростатической и тепловой активацией. Для студентов специальностей 210108...
  • №150
  • 922,14 КБ
  • дата добавления неизвестна
  • изменен
Учебное пособие. - Таганрог: Изд-во ТТИ ЮФУ, 2009. - 50 с. В учебном пособии рассматриваются физические возможности измерения температуры, используемые в микросистемной технике (МСТ), и возможности их интегральной реализации. В частности, подробно описываются активные сенсоры температуры на основе термоэлектричества (эффект Зеебека), пассивные способы, основанные на измерении...
  • №151
  • 1,03 МБ
  • добавлен
  • изменен
Учебное пособие. - Таганрог: Изд-во ТТИ ЮФУ, 2009. - 50 с. В учебном пособии рассматриваются физические возможности измерения температуры, используемые в микросистемной технике (МСТ), и возможности их интегральной реализации. В частности, подробно описываются активные сенсоры температуры на основе термоэлектричества (эффект Зеебека), пассивные способы, основанные на измерении...
  • №152
  • 1,19 МБ
  • добавлен
  • изменен
Москва, Издательство МГТУ им. Н.Э. Баумана, 1998 г. Учебное пособие посвящено основным вопросам проектирования волнового твердотельного гироскопа, включая выбор расчетной модели погрешностей, рекомендации по определению параметров систем управления резонатором, съема и обработки информации, методике балансировки и испытаний гироскопа. Учебное пособие написано в соответствии с...
  • №153
  • 879,80 КБ
  • добавлен
  • изменен
Таганрог, ТГРТУ (ЮФУ), 2007 г. , 125 стр. Учебное пособие. Рассмотрена общая классификация датчиков и теория измерений, основные схемы включения датчиков и их расчёт, физические основы микросистемной техники и полупроводниковых приборов, тензорезистивные сенсоры, пьезоэлектрические сенсоры, термоэлектрические сенсоры, датчики ускорения, вибрации, потока, гироскопы, магнитные...
  • №154
  • 2,62 МБ
  • дата добавления неизвестна
  • изменен
Учебное пособие. — Таганрог: ТРТУ, 2004. — 54 с. В учебном пособии рассмотрено использование электрического поля в компонентах микросистемной техники (МСТ). Первый раздел пособия содержит краткое изложение традиционных сведений об основных закономерностях электрического поля. Во втором разделе излагаются вопросы механики, описывающие поведения компонентов МСТ, находящихся в...
  • №155
  • 1,49 МБ
  • дата добавления неизвестна
  • изменен
Нальчик: Кабардино-Балкарский государственный университет, 2008. - 79 с. В сборнике публикуются материалы докладов, представленных на Международной научно-технической конференции "Микро- и нанотехнологии и фотоэлектроника". Конференция проходила в Эльбрусском учебно-научном комплексе Кабардино-Балкарского государственного университета с 13 по 19 июля 2008 г.
  • №156
  • 1,68 МБ
  • дата добавления неизвестна
  • изменен
Минск: Беларус. навука, 2012г.- 257с . Рассмотрены принципы формирования анодного оксида алюминия, приведены его основные физико-механические свойства, технологические методы получения пленарных и объемных микроструктур. Выведены обобщенные универсальные формулы взаимодействия активных и реактивных сил в электростатических, электротоковых и других микроактюаторах. Определены...
  • №157
  • 9,62 МБ
  • добавлен
  • изменен
Москва: Издательство МГТУ им. Н.Э. Баумана, 2011. — 49 с. Микросистемная техника – активно развивающееся направле ние, создающее функционально законченные нано и микроразмер ные устройства, характеристики которых кардинальным образом отличаются от характеристик устройств аналогичного назначения, созданных по традиционным технологиям. Учебное пособие содержит сведения о...
  • №158
  • 1,31 МБ
  • добавлен
  • изменен
Учебное пособие. — Красноярск: Сибирский федеральный университет, 2013. — 264 с. — ISBN 987-5-7638-2491-9 Раскрывается технологический аспект сенсорики, приводятся сведения о большом многообразии сенсоров. Отмечается важность нанотехнологического подхода к изготовлению сенсоров. Представлена информация о материалах химических сенсоров, их свойствах и принципах конструирования....
  • №159
  • 6,47 МБ
  • добавлен
  • изменен
Учебное пособие для ВУЗов. — М.: ИНФРА-М / Красноярск: Уральский федеральный ун-т, 2014. — 273 с.: ил. — ISBN 978-5-16-100352-7. В учебном пособии раскрывается технологический аспект сенсорики и приводятся сведения о большом многообразии сенсоров. Отмечается важность нанотехнологического подхода к изготовлению сенсоров. Представлена информация о материалах химических сенсоров,...
  • №160
  • 26,15 МБ
  • добавлен
  • изменен
Учебное пособие. — М.: Машиностроение, 2007. — 400 с. Изложены терминология, классификация, конструкции и принципы работы микромеханических осевых и маятниковых акселерометров, датчиков давления и гироскопов LL-, LR- и RR-типов. Даны описание и расчет прямых (датчиков перемещений и деформаций) и обратных (датчиков сил и моментов) преобразователей в микромеханическом исполнении,...
  • №161
  • 11,44 МБ
  • добавлен
  • изменен
Учебное пособие. - М.: Машиностроение, 2007. - 400 с.: ил. Изложены терминология, классификация, конструкции и принципы работы микромеханических осевых и маятниковых акселерометров, датчиков давления и гироскопов LL-, LR- и RR-типов. Даны описание и расчет прямых (датчиков перемещений и деформаций) и обратных (датчиков сил и моментов) преобразователей в микромеханическом...
  • №162
  • 8,48 МБ
  • дата добавления неизвестна
  • изменен
Авторский коллектив: Тимофеев В. Н., Погалов А. И., Угольников С. В., Андрианов А. М., Панкратов О. В. М. : БИНОМ. Лаборатория знаний, 2009. — 176 с. : ил. ISBN 978-5-94774-907-6 Пособие посвящено механике микросистем, являющейся составной частью физики микросистем. Изложены основы теории механических колебаний, анализа напряженно-деформированного состояния несущих...
  • №163
  • 6,36 МБ
  • добавлен
  • изменен
В сборнике представлены тезисы докладов 14 научной молодежной школы (24 – 25 ноября 2011 г., Санкт-Петербург). Тематика докладов - современная микро- и наноэлектроника, энергетика. Организаторы- СПбГЭТУ "ЛЭТИ". ФТИ им. А. Ф. Иоффе РАН. Пленарные доклады Лучинин В.В. Формирование нового технологического уклада Афанасьев В.П., Забродский А. Г. Состояние и тенденции повышения...
  • №164
  • 1,26 МБ
  • добавлен
  • изменен
В сборнике представлены тезисы докладов 12 научной молодежной школы (10-11 октября 2009г. СПб, п. Репино, пансионат "Заря"). Тематика докладов - современная микро- и наноэлектроника, нанодиагностика, микро- и нанотехнологии. Организаторы- СПбГЭТУ "ЛЭТИ". ФТИ им. А. Ф. Иоффе РАН, ИХС им. И. В. Гребенщикова РАН. Пленарные доклады. В. В. Лучинин, Ю. М. Таиров. (СПбГЭТУ "ЛЭТИ") О...
  • №165
  • 828,83 КБ
  • дата добавления неизвестна
  • изменен
Сборник материалов и тезисов докладов 13-й научной молодежной школы по твердотельной электронике Физика и технология микро- и наносистем (12 – 13 ноября 2010 г. Санкт-Петербург, г. Зеленогорск), 99 с. Тематика связана с решением актуальных задач современной микро- и наноэлектроники, микро- и нанодиагностики, микро- и нанотехнологии, физики твердого тела. Ее цель – развитие...
  • №166
  • 1015,87 КБ
  • дата добавления неизвестна
  • изменен
В этом разделе нет файлов.

Комментарии

В этом разделе нет комментариев.