ASTM G 62 - 87 (Reapproved 1998). Standard Test Methods for Holiday Detection in Pipeline Coatings

American Society for Testing and Materials (ASTM). Current edition approved Sept. 25, 1987. Published November 1987. Originally
published as G 62 – 79. Last previous edition G 62 – 85. 4 p.
These test methods cover the apparatus and procedure for detecting holidays in pipeline type coatings.
Method A is designed to detect holidays such as pinholes and voids in thin-film coatings from 0.0254 to 0.254 mm (1 to 10 mils) in thickness using ordinary tap water and an applied voltage of less than 100 V d-c. It is effective on films up to 0.508 mm (20 mils) thickness if a wetting agent is used with the water. It should be noted, however, that this method will not detect thin spots in the coating, even those as thin as 0.635 mm (25 mils). This may be considered to be a nondestructive test because of the relatively low voltage.
Method B is designed to detect holidays such as pinholes and voids in pipeline coatings; but because of the higher applied voltages, it can also be used to detect thin spots in the coating. This method can be used on any thickness of pipeline coating and utilizes applied voltages between 900 and 20 000 V d-c.2 This method is considered destructive because the high voltages involved generally destroy the coating at thin spots.