Shirinbayan M., Zirak N., Benfriha K., Farzaneh S., Fitoussi J. (ed.) Polymer Materials in Additive Manufacturing: Modelling and Simulation

MDPI, 2023. — 211 p. — ISBN: 978-3-0365-6863-8This is a reprint of articles from the Special Issue published online in the open access journal Polymers (ISSN 2073-4360)Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)
Parametric Investigation and Optimization to Study the Effect of Process Parameters on the Dimensional Deviation of Fused Deposition Modeling of 3D Printed Parts
Micromechanical Modeling of the Biaxial Deformation-Induced Phase Transformation in Polyethylene Terephthalate
Numerical Investigation of the Infill Rate upon Mechanical Proprieties of 3D-Printed Materials
Adaptive Mechanism for Designing a Personalized Cranial Implant and Its 3D Printing Using PEEK
Processing and Quality Control of Masks: A Review
Toward Polymeric and Polymer Composites Impeller Fabrication
Mathematical Modelling of Temperature Distribution in Selected Parts of FFF Printer during 3D Printing Process
Characterizations of Polymer Gears Fabricated by Differential Pressure Vacuum Casting and Fused Deposition Modeling
Mathematical Modeling and Optimization of Fused Filament Fabrication (FFF) Process Parameters for Shape Deviation Control of Polyamide 6 Using Taguchi Method
Hybrid Bio-Inspired Structure Based on Nacre andWoodpecker Beak for Enhanced Mechanical Performance