ACI Manual of Concrete Practice 2010. Part 1. ACI 117-06 to ACI 224.3R-95(08)

American Concrete Institute, 2010. — 1200 p.Some of the most important work of the Institute is performed by its technical committees that prepare the committee reports and standards contained in the Manual. Technical committees of the Institute are organized into the following five groups with regard to their function: 100—General, 200—Materials and Properties of Concrete, 300—Design and Construction, 400—Concrete Reinforcement and Structural Analysis, and 500—Specialized Applications and Repair. Committees are assigned numbers that indicate their group or general area of responsibility.
Each standard of the Institute bears a hyphenated number to identify it. The first three digits identify the committee originating the standard, and the last two digits identify the year it was adopted. Thus, standard ACI 305.1-06 was prepared by Committee 305 and was adopted as a standard in the year 2006.
Committee reports are also identified by a hyphenated number with the addition of an “R” to indicate a report rather than a standard. For committee reports, the last two digits refer to either the year of original publication or, in a few cases, to the year of adoption of a related standard.
The following list contains the numbers and titles of all committee reports and standards found in the 2010 ACI Manual of Concrete Practice. Reports and Standards are listed numerically and the location in the Manual follows the title.100—General117-06 Specifications for Tolerances for Concrete Construction and Materials and Commentary, Part 1
121R-08 Guide for Concrete Construction Quality Systems in Conformance with ISO 9001, Part 1
122R-02 Guide to Thermal Properties of Concrete and Masonry Systems, Part 1
126.3R-99 Reapproved 2008 Guide to Recommended Format for Concrete in Materials Property Database, Part 1200—Materials and Properties of Concrete201.1R-08 Guide for Conducting a Visual Inspection of Concrete in Service, Part 1
201.2R-08 Guide to Durable Concrete, Part 1
207.1R-05 Guide to Mass Concrete, Part 1
207.2R-07 Report on Thermal and Volume Change Effects on Cracking of Mass Concrete, Part 1
207.3R-94 Reapproved 2008 Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions, Part 1
207.4R-05 Cooling and Insulating Systems for Mass Concrete, Part 1
207.5R-99 Roller-Compacted Mass Concrete, Part 1
209R-92 Reapproved 2008 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures, Part 1
209.1R-05 Report on Factors Affecting Shrinkage and Creep of Hardened Concrete, Part 1
209.2R-08 Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete, Part 1
210R-93 Reapproved 2008 Erosion of Concrete in Hydraulic Structures, Part 1
211.1-91 Reapproved 2009 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete, Part 1
211.2-98 Reapproved 2004 Standard Practice for Selecting Proportions for Structural Lightweight Concrete, Part 1
211.3R-02 Reapproved 2009 Guide for Selecting Proportions for No-Slump Concrete, Part 1
211.4R-08 Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials, Part 1
211.5R-01 Reapproved 2009 Guide for Submittal of Concrete Proportions, Part 1
212.3R-04 Chemical Admixtures for Concrete, Part 1
212.4R-04 Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete, Part 1
213R-03 Guide for Structural Lightweight-Aggregate Concrete, Part 1
214R-02 Evaluation of Strength Test Results of Concrete, Part 1
214.4R-03 Guide for Obtaining Cores and Interpreting Compressive Strength Results, Part 1
216.1-07 Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies, Part 1
221R-96 Reapproved 2001 Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete, Part 1
221.1R-98 Reapproved 2008 Report on Alkali-Aggregate Reactivity, Part 1
222R-01 Protection of Metals in Concrete Against Corrosion, Part 1
222.2R-01 Corrosion of Prestressing Steels, Part 1
222.3R-03 Design and Construction Practices to Mitigate Corrosion of Reinforcement in Concrete Structures, Part 1
223-98 Standard Practice for the Use of Shrinkage-Compensating Concrete, Part 1
224R-01 Reapproved 2008 Control of Cracking in Concrete Structures, Part 1
224.1R-07 Causes, Evaluation, and Repair of Cracks in Concrete Structures, Part 1
224.2R-92 Reapproved 2004 Cracking of Concrete Members in Direct Tension, Part 1
224.3R-95 Reapproved 2008 Joints in Concrete Construction, Part 1
...